6 STATION AC CONTROLLER

Using sleek contemporary design, the 5006 indoor mounted controller offers a true programming flexibility for each valve. The controller is simple to program and allow for each valve to be programmed independently of the others, from 1 minute to 12 hours in one minute increments.

• Four buttons with an integrated liquid crystal display (LCD)
• Independent program for each valve
• Easy to read AM/PM clock
• Watering Duration: from 1 minute to 11 hours and 59 minutes in 1 minute increments
• 7 day programming schedule or intervals from 1 to 30 days
• Four start times per day on weekly schedule
• Automatic short detector isolates the faulty valve and continues the irrigation cycle
• Start time stacking prevents hydraulic overload
• Master valve remote pump start circuit
• Default program: after prolonged power interruption each station will operate for 10 minutes
• Can be programmed under backup battery power without AC power connection
• Water budget from 95% to +95% in 5% increments
• "Rain Off" mode
• Rain delay up to 30 days with auto restart
• Three modes: automatic, semi-automatic and manua
• Irrigation suspension override (rain mode)
• Internal manual bleed
• Can operate two valves at the same time
• Waiting mode for third and fourth valves
• Manual irrigation cycle via the controller
• Battery backup retain program memory during a power outage
• 3 years warranty

• Input required: 110 VAC, 60 Hz 28 VA input (UL listed plug in transformer included)
• Output: 24 VAC 0.83 mA
• Outputs: 24 VAC, 0.27A
• Maximum output: 0.83A
• Program backup: 9-volt battery (not included)
• Including a terminal for sensor connection

• Body and cover: ABS