Toro 570Z Series Sprinklers
570Z-6P

Pop-Up Height: 6"
Overall Body Height: n/a
Bottom: ½" female threaded inlet
These Pop-Up Spray Heads are sold body ONLY (nozzles not included).
Nozzles purchased separately to allow you to choose exact pattern and radius (distance) that you need.

Note: If the overall height of spray head is too tall for your application; you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.

Featuring a low-pressure seal that flushes only upon retraction; 570Z models are ideal for small turf areas and intricate designs. Six distinct pop-up sprinkler bodies and a host of interchangeable nozzles provide unlimited design flexibility.

Water conservation made easy
570Z PRX Series sprinklers are the only one of its kind to have X-Flow™. With this high-flow shut-off device built into the riser; it restricts water loss by 98% if the nozzle is removed. That equates to a swimming pool full of water a year.

570Z sprinklers come with a degradable flush plug to conserve our natural resources. Not only environmentally friendly; but convenient too - these plugs won't litter an installation site.

Features

• Seal prevents flushing on pop-up; enabling more heads to be placed on same zone
• Low-pressure sealing at 15 PSI
• Retraction flushing clears debris for reliable pop-down
• Accepts all Toro spray nozzles - including 570 MPR Plus nozzles and filter screens
• Check-O-Matic models available - eliminating low-head drainage
• Ratcheting riser feature for easy arc adjustment
• Side-inlet models available on both 6" and 12" sprinkler bodies for easier installation
• Pop-up design
• Durable engineering plastic construction
• Stainless-steel retraction spring
• Screw-on cap (retrofits all previous Toro 570 bodies)

• Recommended operating pressure: 20-50 PSI
• Maximum operating pressure: 75 PSI
• Flow rate: 0.05-5.5 GPM
• 1/2" female-threaded inlet
• Dimensions: Body diameter:
  • 1 3/8" on 2"; 3"; 4" and 6" bodies
  • 1 5/8" on 12" body
  Cap diameter: 2"
• Side inlet: 4 3/4" from top of sprinkler to center of side inlet
• Effluent cover available (Part No. 89-3903)
• Choice of nozzle patterns
• 570Z Series radius: 0'–17'
• 570Z PRX Series radius: 0'–15'
• Wide selection of spray radius options:
    MPR Nozzles—5'; 8'; 10'; 12' and 15'
    TVANs—8'; 10'; 12'; 15' and 17'
• Shrub; 2"; 3"; 4"; 6" and 12" bodies available with 570Z Series
• Shrub; 4"; 6" and 12" bodies available with 570Z PRX Series
• Operating pressure range: 20–50 psi
• Optimum nozzle performance at 30 psi