KING INNOVATION WATERPROOF WIRE CONNECTORS
For irrigation systems and landscape lighting applications. This product comes 150 in a canister.

• One-Step® Installation
• Corrosion Proof
• Reduces Risk of Fire
• UL 50 tested for watertight/raintight
  applications
• UL listed and CSA certified as a
  Pressure Type Connector

• Max. Voltage: 600V (1,000V in fixtures and signs)
• Connector Size: 21/32” x 1 5/16”
• Wire Type: Copper/Copper
• Wire Range: Min #22/Max #8
• Temperature Rating: 105°C (221°F)
• Silicone Sealant: -45°F to 400°F
• UL Designation: KR

IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.

1. Strip #22-18 wires 1/2” and #16-12 wires 3/8”.
2. Align frayed strands or conductors.
3. Do not pre-twist. Place stripped wires together with ends even, but lead stranded wire slightly.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5. Swipe excess sealant in and around conductors. Do not reuse.