RAIN BIRD BRASS IMPACT ROTORS:

Rain Bird Brass Impact Rotors are a line of rugged irrigation sprinklers that can be used for any size application.

Each and every Rain Bird Impact Sprinkler is engineered with efficiency and durability in mind. Rain Bird Brass Impact rotors are made of long-lasting brass and stainless steel and are available in full- or part-circle models. Each Rain Bird Impact Sprinkler is designed to keep landscapes green and flourishing all year round.

• Proven impact drive.
• Long-wearing TNT bearing.
• Straight-through flow for superior performance in dirty water.
• Full-circle or adjustable arc 20 degrees to 340 degrees.
• Precision Jet tube (PJ) minimizes side splash.
• Stainless steel distance control diffuser pin allows up to 25% radius reduction.
• Rugged brass; bronze and stainless steel construction.
• FP trip for full- or part-circle operation.

• Precipitation Rate: 0.76 to 0.94 inches per hour (19 to 23 mm/h)
• Radius: 57 to 65 feet (17;4 to 19;8 m)
• Pressure: 50 to 80 psi (3;5 to 5;5 Bars)
• Flow: 12.9 to 16.5 GPM (2;93 to 3;75 m3/h; 0;81 to 1;04 l/s)
• 1" (26/34) female NPT or BSP threaded inlet
• For standard nozzle at normal operating pressure; the highest point of stream is 10 feet (3;1 m) above nozzle
• Nozzle outlet trajectory: 27 degrees

Rain Bird 65PJADJ-TNT Performance Chart

Pressure (psi)	Nozzle	Radius (ft.)	Flow (GPM)	Precipitation (In/h)	Precipitation (In/h)
50	16	57	12.9	0.76	0.88
60	16	58	14.2	0.81	0.94
70	16	63	15.4	0.75	0.86
80	16	65	16.5	0.75	0.87

Precipitation Rates based on half-circle operation.
Square spacing based on 50% diameter of throw.
Triangular spacing based on 50% diameter of throw.
* Standard Nozzle Size
Optimum water distribution achieved at 60 to 80 psi (4;1 to 5;5 Bars).
Performance data collected in zero wind conditions.