MS-075IA: 3/4" Insert Adapter
This 3/4" Insert Adapter is used to provide a connection into or out of the manifold for 3/4" Poly pipe or to connect to the outlet of a valve on the manifold. To connect Poly pipe push 3/4" poly pipe over the barb and clamp tight using Oetiker or screw clamps.
This adapter is typically used with a MS-NIP Adapter when used as the outlet to a valve on the manifold system. The MS-NIP adapter is used to connect a valve with a Female Thread Outlet to the F Buttress of a MS Manifold System adapter such as one of the following: MS-100x075; MS-125x100; MS-075IA; or MS-100IA. The MS-NIP adapter allows you to attach the MS-075IA Adapter to the outlet of a 1" fpt valve. For example: screw the MS-NIP into the 1" fpt outlet of a valve then attach the MS-075IA to make a 3/4" barb outlet on the valve to connect to 3/4" poly pipe.
The valve manifolds are designed to connect double; triple; or quadruple manifolds together using a MS series coupling to make larger manifolds if needed.
Overall Description of the
1" Half Union Manifold System
Eliminate leaks and the problems with servicing valves by building manifolds from this high-quality manifold system.
- Half union fittings and adapters mate with manifold pieces to build a quality 1" manifold system for quick and convenient installations.
- Tight o-ring seals eliminate leakage.
- Variety of outlets; adapters; and couplings offered for different size PVC and poly pipe.
- Size: SCH80
- Color: Gray
- Operating pressure up to 235 psi at 73°F (23°C)
- MS-DM: double manifold with M Buttress Threads
- MS-TM: triple manifold with M Buttress Threads
- MS-QM: quadruple manifold with M Buttress Threads
- MS-MA: male adapter
- MS-FA: female adapter
- MS-NIP: male NPT x buttress nipple
- MS-FNIP: female NPT x buttress nipple
- MS-CAP: cap with F Buttress Threads
- MS-CPLG: coupling
- MS-125x100: 1 1/4" spigot x 1" slip adapter
- MS-100x075: 1" spigot x 3/4" slip adapter
- MS-100IA: 1" insert adapter
- MS-075IA: 3/4" insert adapter