1. Standard watering cycle: weekly
2. Cyclical watering cycle:From once per 1 day up to once every 30 days
3. Repeat watering cycle: From once per 1 hour to once per 23 hours
4. Repeat watering cycles within scheduled hourly cycles, placed with a window to start and end at any time of the day.

• Body and Core: ABS

• 4" W x 1.5" D x 6.25" H (10 cm W x 3.8 cm D x 16 cm H)

DIG 5006-I SIX-STATION VAC TIMER WITH 4 START TIMES AND WALL MOUNT:

Designed for residential, light commercial and propagation use, DIG 5000 series indoor controllers feature independent programming for each valve, four start times per day per valve, cycles up to 30 days, watering durations as short as 1 minute and up to 12 hours. Each offers a wide range of flexible programs and down time protection. 5000 series controllers are truly unique in their class.

• Watering durations from 1 minute to 12 hours in 1 second increments
• Four start times per program per valve
• 7 day programming schedule or one to 30 days
  • Independent programming of start time, run time and day of the week for each valve
• Automatic, semi-automatic and manual modes for each program
• Rain delay up to 30 days with auto restart
• 4 buttons with large integrated liquid crystal display (LCD)
• Easy to read AM/PM clock
• One 9-volt backup battery
• Automatic short circuit detection isolates the shorted valve, continues irrigation cycle and gives visible alarm
• Start time stacking prevents hydraulic overload
• Can operate two valves at a time
• Master valve remote pump start program: after prolonged power interruption, each station will operate for 10 minutes
• Rain or moisture sensor terminal hook up

• Input Required: 120 VAC, 60Hz
• Output: 24 VAC, 0.27A
• Maximum Output: 0.83A
• Capacity: Two 24 VAC Solenoid Per Station
• One Terminal for Sensor Connection
• Sensor Override: Allows Sensor Bypass Regardless of Sensor Status