DIG EXL-FOGGER SERIES 500:

EXL 500 is designed as a low flow fogger head with
micro-sized droplets. Design flexibility is achieved with interchangeable nozzles to maximize the cooling and humidifying options. DIG’S EXL 50-500-xx fogger can significantly reduce the temperature inside greenhouses to maintain ideal temperature and humidity. Applications: Mist cooling and humidifying; Root development.

Features and Benefits

50-504-35-12: 3 GPH per outlet 4-way fogger assembly attached to 12 inches of .270 OD Micro-tubing
Incorporates a vortex mechanism, breaking the water into micro-sized droplets
Can be used for overhead cooling and humidifing in a closed structure
Interchangeable color coded nozzles
Can be used on an antileak device with one, two, three or four fogging head assemblies
Designed without a bridge to prevent dripping
Three part construction with O-ring for a tight seal
Manufactured from superior durable plastics for extended life operation
Completely assembled with 12" micro tubing with .270 OD, barb, weight and anti-leak device

Performance and Technical Data

Material Male and Female Body: Polybutylene (PB), O-ring: Buna N, Nozzle: Acetal
Nominal Flow Rate at 50 PSI (3.5 bar)
Pattern: 360°
Trajectory Angle: Approximately 30-35°
Average Droplet Size is 50 to100 Microns
Filter Requirements: Flow up to 1.5 GPH (6 l/h) Minimum of 200 Mesh (80 microns), 2 GPH (8 l/h) and up to 155 Mesh (100 micron)
Used Only with Antileak Model 52-530-X

Materials