DC Solenoid with 3/4" or 1" Actuator
DIG  -  R710DC-013

Use with 700 series controllers to convert 3/4" or 1" plastic or brass manual anti-siphon valves and angle valves to automatic operation.

Actuator

• Built in with flow control
• Contains all parts required to convert on most 3/4" and 1" brass or plastic manual anti-siphon valves
• Internal bleed, manual override for manual ON/OFF
• Constructed of glass reinforced nylon with a stainless steel spring; non-corrosive materials
• High flow with low pressure loss
• Normally closed
• Easy in-line maintenance
• Smooth valve opening and closing prevents pressure surge hazards

Solenoid

• Sealed potted technique for waterproof construction
• Two color-coded wires
• Internal bleed and manual override for manual ON/OFF

Actuator

• Operating Pressure: 25-100 PSI
• Temperature Range: Up to 170°F
• Materials:
  • Actuator body and cover: Glass Reinforced Nylon
  • Diaphragm: EPDM
  • Metal Parts and Screws: Stainless Steel 303
  • O-ring: Buna-N

Solenoid

• Solenoid thread: 3/4-20
• Operating Pressure: 10-150 PSI
• Control Orifice: .65"
• Temperature Range: 41°F to 158°F
• Two-way magnetic latching, normally closed, bi-directional pulse
• Coil Operating Data:
  • Coil resistance 3.0 Ω, minimum pulse 20-100 mS duration at 6-18 volts
    • Red + and white - to latch open
    • Red- and white + to latch closed
• Leads: 30" (76 cm) red/black
• Materials:
  • Housing Material: Plastic - reinforced nylon
  • Inside housing: stainless steel
  • Plunger rubber cap: EPDM
  • Seals: EPDM
  • O-ring: Buna-N
• Dimensions:
  • Diameter: 1.18" (max)
  • Overall Length: 2.330" without adapter, 2.375" with adapter