DIG 1/2 INCH POLYETHYLENE TUBING:

DIG Polyethylene distribution tubing is made from Dow Chemicals' 7510 FINGERPRINT resin. FINGERPRINT polyethylene resins offer an opportunity for fewer leaks and cracks in today micro-irrigation hose and drip tubing. FINGERPRINT polyethylene resins were developed to stand the test of time in both agricultural and landscaping applications. FINGERPRINT polyethylene resins that acts as a marker, making it possible to verify the presence of resins supplier in the drip tubing and drip line years after installation. Choosing DIG drip tubing with 7510 FINGERPRINT Resins is an excellent way to ensure the system is made to stand the test of time.

• Made of low-density 7510 Union Carbide UV-resistant poly resin material
• May be used above or below ground
• Minimum 2% carbon black added for maximum UV protection
• Available in a wide range of coil lengths

• Excellent burst strength
• Excellent flexibility for easy roll-out
• Excellent ESCR (environmental stress crack resistance), weather resistance, and burst properties

• Operating Pressure: Up to 60 PSI (4.2 BAR)
• 100' of 1/2" (.620 ID x .710 OD)
• Density: 0.920 g/cc for metric and 0.0332 lb/in³ US
• Environmental Stress Crack Resistance: 500 hour test
• Hardness, Shore D: 44.0

• Body: ABS
• Inserts: Polycarbonate