• Use in germination, seeding and rooting in greenhouses and nurseries
• Use for overhead irrigation, propagation and cooling in greenhouses and nurseries

DIG 52-038-15-36 MICRO SPRAYER SERIES 038:

Designed for use in greenhouses, 52-038-xx micro sprayers produce fine droplets and come in a wide range of flow rates. Ideal for maintaining conditions conducive to propagation and germination. An optional antileak device prevents dripping at the beginning and the end of each irrigation cycle, keeping the entire line pressurized.

• Excellent performance with uniform water distribution
• Color coded nozzles for flow rate identification
• Modular design allows for a wide range of interchangeable components
• Suitable for upright and inverted position
• Maintains constant humidity or cooling in greenhouses
• High uniformity due to distribution accuracy and low precipitation rate
• Complete assembly includes LP antileak device a 36" micro tubing with .270 OD, barb and weight

• Material: Polyacetal
• Nominal Flow Rate of 15 GPH at 29.4 PSI
• Wetting Diameter of 9' at 29.4 PSI
• Operating Pressure: 20 to 35 PSI (1 to 2.4 bar)
• Operating Pressure For Overlap Irrigation: 35 PSI (2.4 bar)
• Pattern: 340°
• Trajectory Angle: Approximately 1°
• Average Droplet Size: .0008" (0.2 mm) Very Fine at 45 PSI
• Filter Requirements: 120 Mesh (130 micron) up to 24 Gph, 24 to 42 GPH 80 Mesh (180 micron)