View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy



  Home > Micro Sprinklers > Micro Sprayers >

  DIG 52-038-24-24 24 gph Micro Spray with 24 in. Micro-Tubing
DIG 52-038-24-24 24 gph Micro Spray with 24 in. Micro-Tubing
 



Our Price: $2.67


Product Code: 52-038-24-24
Qty:

Description
 
Untitled Document
DIG 52-038-24-24 Micro Sprayer
Applications
  • Use in germination, seeding and rooting in greenhouses and nurseries
  • Use for overhead irrigation, propagation and cooling in greenhouses and nurseries

DIG 52-038-24-24 MICRO SPRAYER SERIES 038:

Designed for use in greenhouses, 52-038-xx micro sprayers produce fine droplets and come in a wide range of flow rates. Ideal for maintaining conditions conducive to propagation and germination. An optional antileak device prevents dripping at the beginning and the end of each irrigation cycle, keeping the entire line pressurized.

Features & Benefits
  • Excellent performance with uniform water distribution
  • Color coded nozzles for flow rate identification
  • Modular design allows for a wide range of interchangeable components
  • Suitable for upright and inverted position
  • Maintains constant humidity or cooling in greenhouses
  • High uniformity due to distribution accuracy and low precipitation rate
  • Complete assembly includes LP antileak device a 24" micro tubing with .270 OD, barb and weight
Performance & Technical Data
  • Material: Polyacetal
  • Nominal Flow Rate of 24 GPH at 29.4 PSI
  • Wetting Diameter of 10' at 29.4 PSI
  • Operating Pressure: 20 to 35 PSI (1 to 2.4 bar)
  • Operating Pressure For Overlap Irrigation: 35 PSI (2.4 bar)
  • Pattern: 340°
  • Trajectory Angle: Approximately 1°
  • Average Droplet Size: .0008" (0.2 mm) Very Fine at 45 PSI
  • Filter Requirements: 120 Mesh (130 micron) up to 24 Gph, 24 to 42 GPH 80 Mesh (180 micron)
DIG Series 038 Micro Sprays Flow Rate and Diameter Table

Model 52-038-xx for inverted propagation and irrigation

The tables below represent recommendations and solutions to achieve a high level of uniformity within a specific area. This spacing will achieve the best results with high coverage and uniformity, and can also achieve a lower system cost with higher efficiency.

Step 1: Select the micro sprayer flow and application rate
Step 2: Select the bench width
Step 3: Select the micro sprayer spacing

Based on this selection you can determine the application rate in inches per hour

DIG Series 038 Micro Sprays Applications Table

 




Browse for more products in the same category as this item:

Micro Sprinklers > Micro Sprayers
DIG Corp
 
   
  Built with Volusion