PRESSURE COMPENSATING (PC) DRIPLINES:

Advanced, pressure-compensating, linear low-density polyethylene drip line. The cylindrical flow-regulated inline emitters are self-contained units molded at specified intervals into the inner wall of the polyethylene tubing. Each has a self-cleaning mechanism at the water outlet chamber. Both the tubing and the drippers are manufactured from the finest quality resins to ensure uniform watering from each emitter, year after year.

• Used for above or below grade installation
• Two (2) flow rates to provide maximum flexibility in a variety of applications
• Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures
• Flow uniformity regardless of operating pressure and variation along the line
• The dripper and the diaphragm are self-contained units that are molded to the interior wall of the tubing
• Turbulent flow through a large labyrinth water passage helps reduce clogging
• Clogging is also reduced due to the dripper's filter intake area being continuously flushed by the water flow
• Made of three (3) individual sections including a cylindrical plastic housing with labyrinth water passage, a floating silicon diaphragm and a plastic receptacle
• Two (2) outlets per dripper ensures a reduced chance of clogging
• Resistant to chemicals and fertilizers commonly used in landscaping
• Flexible tubing for easy installation
• Used with low density, UV resistant, 7510 polyethylene resins with Fingerprint™
• The dripline is marked with flow rate, size and date for easy identification