DIG 1/4" NON-PC MICRO-LINE DRIPLINE:

DIG's Micro-line is a small diameter, low-density polyethylene dripline. The dripline emitters have a cylindrical design with a long turbulent flow path and an inlet filter to prevent particles from entering the drip emitter labyrinth. The Micro-line dripline inline emitters are inserted and welded to the interior wall of the polyethylene micro tubing in a preset spacing making it suitable for use in a wide range of applications.

Features and Benefits

Used for above or below the surface or under mulch for a variety of applications such as containers and narrow plantings
Large labyrinth water passage and turbulent flow help reduce clogging
Inlet filter helps to prevent particles from entering the drip emitter labyrinth path
Two (2) outlets per dripper ensure less chance of clogging
Resistant to chemicals and fertilizers commonly used in landscape applications
Used with 1/4" (5 mm) barbed fitting
Flexible tubing for easy installation
Color coded labels for easy identification
Made of low-density, UV-resistant, 7510 polyethylene Fingerprint™ resins

Material

Liner: low-density polyethylene

Specifications

Flow rates: .52 GPH @ 15 PSI (2.1 l/h)
- Dripper color code: blue
Operating pressure: 7-20 PSI (.5-1.4 BAR)
Dripline color code: black or brown
Dripline spacing: 6", 9" or 12" (15 cm, 22 cm, or 30 cm)
Drip tubing size: 1/4" (5 mm) with .170 ID x 240 OD (4 mm ID x 6 mm OD)
Minimum bending radius: 2' (60 cm)
Available in 100', 500', 1000' and 3000' Coils (30 m, 150 m, 300 m, 900 m)
Filter requirement: 155 Mesh

This is not a Free Shipping item.
All products not qualifying for free shipping must be ordered separate from other products. You may however place multiple items that do not qualify in the same cart. Shipping and handling fees will apply.