Irrigation Controller DCI Connectors

We carry a variety of Direct Controller Interface (DCI) connectors for interfacing our receivers to irrigation systems. DCI connectors are designed for portable use with our TRC Commander or Sidekick FM Systems. DCI connectors are ideal when you need remote access to several irrigation controllers.

The DCI converts the logic of our universal receivers to that of the irrigation controller. This extends the station limit to that of the controller; rather than limits of 12; 24 or 32 stations.

Simply install a DCI-1 cable into each controller. This will outfit the controller with a port to plug the DCI into. The DCI works with the following irrigation controllers:

Irrigation Connectors for Irritrol Dial & MC

The following parts are required for the Irritrol Dial and MC series of irrigation controllers:

Part #01381

Part #01382

Irrigation Connectors for Superior Sterling

The following parts are required for the Superior Sterling series of irrigation controllers:

Part #01381

Part #01382

Irrigation Connectors for Hunter ICC; SRC; Pro-C

The following parts are required for the Hunter ICC; SRC; and Pro-C series of irrigation controllers:

Part #01384

Part #01386

Irrigation Connectors for Hit Logic 2 & 3

The following parts are required for the Hit Logic 2 and 3 series of irrigation controllers:

Part #01381

Part #01385

Irrigation Connector for Rain Master

The following part is required for the Rain Master series of irrigation controllers:

Part #01383