| EZ-Flare The Must Have Tool! If you use Poly pipe for your sprinkler system; you must have the EZ-Flare. This tool is the newest innovation for working with poly pipe. Expands poly pipe to just the right size to allow the insert fitting to easily slide into the pipe yet maintain a firm connection. No More Hard Work Forcing the Fitting into the Poly Pipe! Then the EZ-Flare tool crimps the clamp perfectly. All this within seconds! Make a mistake and need to rework the connection? No problem; the EZ-Flare provides the best and easiest way to remove the clamp and rework the connection. EZ-Flare is 3 Tools in One! EZ-Flare Application The Revolutionary New Irrigation Productivity Installation Tool Three Easy Steps Step 1. Cut the Poly pipe to the desired length and place the clamp on the pipe. Step 2. Place the EZ-Flare tool into the pipe and expand the pipe Expand 1/3 of the way; rotate the tool 30 degrees and expand another 1/3. Rotate tool another 30 degrees and finish the expansion. Step 3. Insert the fitting into the pipe and crimp the clamp. If You Need To Repair; Reposition or Remove the Clamp and Fitting Grip the crimped clamp detail with the tool jaws Twist the crimped detail +/- 30 degrees The clamp will release Reposition the clamp Re-Crimp the clamp  |  |  | | Flare the Pipe | Completed Connection | To Remove or Reposition Clamp | Part Numbers: F20110 1-Inch Flaring Tool F27110 3/4-Inch Flaring Tool F30110 1-Inch Union Repair Fitting F40110 Belt Carrier for Flaring Tool |