Home > Fertilizer Systems > EZFlo Injection Couplers > EZFLo Slip Injector Couplings >

EZ Flo C-200 2 in. Slip Injector Coupling

EZ Flo C-200 - 2 inch Slip Install Coupling

Our Price: $24.11

Product Code: C-200

Qty:

Description

EZ Flo C-200 - 2 inch Slip Injector Coupling Connector

	Mainline Installation
	Not Available
	Not Available
	Not Available

EZ FLO STANDARD SLIP COUPLING CONNECTORS:

2" Slip Coupling for EZ-Flo System. By far the most popular connection type is the standard slip coupling connection. Standard Slip Coupling Connectors are available in sizes ranging from 3/4" on up with socket x socket connections for gluing into PVC pipe (Sizes above 2.5" are special order items-Call for pricing). Standard Coupling Connectors are manufactured from Schedule 40 PVC with 1/4" nylon barbed tubing connections.

Standard Coupling Connections are used to connect the EZ-FLO system to the irrigation flow line before or after the valve with the 1/4" flexible tubing provided with every EZ-FLO system. These connectors are principally used in new installations or in retrofits where there is adequate room to flex the irrigation pipe. Not recommended for EZ005 and larger models.

Click image above to enlarge.

Hose Bib & Drip Cap Setting	Coupling Connection Feed Ratio

Slow	15,000 to 1
1	8,000 to 1
2	2,000 to 1
Fast	400 to 1

EZ-FLO Systems are Easy to Install and Easy to Use

EZ-FLO Systems can be installed in minutes. We recommend

that they be installed in an underground valve box but they can also be hidden under decorative rocks or housed in above ground structures when necessary. The only requirement is that they be installed after an approved backflow prevention device as determined by local plumbing code.

EZ-FLO main line systems are installed after the backflow prevention device and normally before the irrigation zone valves to allow the unit to feed all irrigation zones. A typical installation is shown here:

In this configuration, when an irrigation zone valve is turned on, the EZ-FLO fertigation unit automatically adjusts to pressure and flow and precisely meters out the appropriate fertilizer based on the water volume flowing into that zone.

EZ-FLO main line units can also be installed after the zone valve or directly in-front of a single zone valve or multiple zone valves if you want to isolate a zone(s) from the other zone(s). An example is shown to the right and could be for a larger irrigation system that services lots of open turf but the owner wants to focus on their flower beds or in the case of a municipal park, just the baseball field.

EZ FLO Standard Slip Coupling Connectors:

EZ FLO Threaded Coupling Connectors:

Average Customer Review:

3 of 5

| Total Reviews: 1 Write a review.

0 of 0 people found the following review helpful:

Works but with limited flow range	October 6, 2012
Customer: Thomas Phillips from Palisade, CO United States

This coupling works well when flow and linear velocity (feet per second) of the water is high. At low flow rates it stops working. I modified it to work better in my range of flow rates. Suggest you get the ball valve version if you have many zones with different flow rates.

Was this review helpful to you?

Browse for more products in the same category as this item:

Fertilizer Systems > EZFlo Injection Couplers > EZFLo Slip Injector Couplings
Manufacturers > EZ Flo

Lawn Irrigation

Drip Irrigation

Hose & Sprayers

Greenhouse & Nursery

Lawn & Garden

Landscape Lighting

EZ FLO STANDARD SLIP COUPLING CONNECTORS:

EZ FLO Standard Slip Coupling Connectors:

EZ FLO Threaded Coupling Connectors: