This EZ-FLO 1.5 Gallon Tank Assembly Unit comes with:

You Will Need A Coupling Connector; please choose the correct connector for your application when adding this item to your cart.

Then Finally Just Add Some Fertilizer And You Are All Done!

EZ-FLO Main Line Units

• Simple yet Precise - EZ-FLO Main Line Systems attach directly to your in-ground sprinkler and/or drip irrigation system. Every time you use your irrigation system; EZ-FLO releases small; precision doses of water soluble or liquid non-hazardous fertilizers into the water stream.
• Easy to install - EZ-FLO Systems can be installed in minutes. They can be installed underground or hidden under decorative rocks or structures.
• Very Reliable - All models are equipped with shutoff valves for ease of refill and a pressure relief valve that releases and resets when water pressure in the tank exceeds 150 pounds per square inch (10 bars). All premium versions carry a five (5) year manufacturer's warranty.
• Low Cost; Low Maintenance - The EZ-FLO Main Line Systems are an extremely cost-effective way to fertigate your landscape; simply add more fertilizer when needed!
  

Refill Suggestions
FOR THE BEST RESULTS; PLEASE USE THESE RATIOS:
(EZ-FLO Model Number & Recommended Refill Quantity)

EZ-FLO Installation Demo
provided by Sprinkler Warehouse

EZ-FLO Main Line Systems Feed the Entire Landscape
Automatically Every time You Water

EZ-FLO Systems are Easy to Install and Easy to Use

In this configuration; when an irrigation zone valve is turned on; the EZ-FLO fertigation unit automatically adjusts to pressure and flow and precisely meters out the appropriate fertilizer based on the water volume flowing into that zone.

EZ-FLO main line units can also be installed after the zone valve or directly in-front of a single zone valve or multiple zone valves if you want to isolate a zone(s) from the other zone(s). An example is shown to the right and could be for a larger irrigation system that services lots of open turf but the owner wants to focus on their flower beds or in the case of a municipal park; just the baseball field.

Main-line Models and Sizes

EZ 010-HC
10 gallon (Spec sheet; click here)

EZ 020-HC
20 gallon (Spec sheet; click here)

EZ 030-HC
30 gallon (Spec sheet; click here)

All models are equipped with shutoff valves for ease of refill and a pressure relief valve that releases and resets when water pressure in the tank exceeds 150 pounds per square inch (10 bars). All premium versions carry a five (5) year manufacturer's warranty.

Size the Model to your Landscape

What size model you choose to order is dependent on a few factors.

• What is the composition of the landscape materials? Turf uses more irrigation water than a dense ground cover or shrubs with deeper root masses.

• What products are you interested in applying through your irrigation system? Some products have higher application rates than others.

• How often do you want to refill?

In the end; this last point is the one that is the ultimate determining factor. If you want to refill less frequently; simply go up in size. If you do not mind refilling more often; then you can get by with a smaller size than what would be recommended. The following table identifies a typical landscape configuration and sizes that can be served with each EZ-FLO main line model along with other sizing information.

Please note that coverage levels assume a 4-6 week desired refill cycle for EZ001CX to EZ010-FX models. High capacity models (designated as HC) are designed for commercial landscapes serviced by professional maintenance companies. Property sizing for those units is based on a 2-3 week refill schedule. Growers and nurseries use other sizing metrics (pounds per square foot and PPM) which can be found in their related web pages.

Fertilizer Distribution Rates

For a detailed look at how EZ-FLO's technology works see our Technical Specifications.

All EZ-FLO fertigation units have an adjustable cap with four reference settings corresponding to the amount of fertilizer mixed with the water: The cap can also be set at points between these four reference settings for unlimited adjustment flexibility within the maximum and minimum proportioning rates for the cap.

Main-line Cap

The following table shows actual fertilizer proportioning rates converted to ounces; teaspoons and milliliters at the various cap reference settings along with the approximate gallons of water through the irrigation system that will empty a given size tank: