PRESSURE COMPENSATING DRIP LINE

The Excel PC drip lines are extruded tubing with self contained flow regulated emitters molded to the inside wall of the tubing. Both the tubing and the drippers are manufactured from the finest quality reins to ensure uniform watering from each emitter, year after year.

• Used for above or below grade installation
• Two flow rates to provide maximum flixibility in a variety of applications
• Flow regulated, all drippers deliver equal floq in a wide range of operating pressures.
• Flow uniformity regardless of operating pressure and variation along the line
• The dripper and the diaphragm are self contained unites that are molded to the interior wall of the tubing
• Turbulen flow through a large water passage to the labryinth helps reduce clogging
• Clogging resistance is due to the design of the dripper's filter intake area being continuously flushed by the water flow throughout the operation of the system
• Two outlets per dripper ensures a reduced chance of clogging
• Resistant to chemicals and fertilizers commonly used in the landscape
• Flexible tubing for easy installation
• Used with low density, UV resistant, 7510 Polyethelene resins with Finger Print.
• The drip tubing is marke with flow rate and size for easy identification

• Flow rates
  • .53 GPH - Color Code - Orange
  • 1 GPH - Color Code - Gray
    
• Operating Pressure: 12-50PSI
• Drippers Colors
  • .53 GPH - Yellow
  • 1 GPH - White
• Drip Line Spacing - 12" and 18"
• Tubing Size:
  • 1/2" , .550 ID x .640 OD
  • 1/2" , .570 ID x .670 OD
• Minimum Bending Radius: 5'
• Availabe in 100' and 500" coils
• Filter Requirement: 155 mesh

• Liner low-density polyethelene