View Cart Checkout

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy

  Home > Febco Double Check Assemblies >

  Febco 850-200 2 inch DCA Backflow Preventer
FE850-200 - Febco 2 inch Double Check Assembly

Our Price: $291.67
Sale Price: $272.85
You save $18.82!

Product Code: FE850-200

Untitled Document
Buy Now! Febco FE850-200 Double Check Assembly Febco FE850-200 Double Check Assembly Febco FE850-200 Double Check Assembly
Febco FE850-200 Double Check Assembly


Febco MasterSeries 850 In-Line Design Double Check Valve Assemblies are designed to prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. They feature a bronze body and threaded ball valve end connections. Maximum Working Pressure: 175psi.





Febco FE850-200 Double Check Assembly 360 degree product view

This is a 3D image. To rotate, click on the product image above and move your mouse from left to right.
Febco FE850-200 Double Check Assembly Product Manuals




WARNING! Irrigation systems supplied by domestic or private potable water systems are considered to be a potential pollution hazard to the water supply. These systems must include protection to prevent possible backflow of irrigation water into the potable water supply.

Federal law requires a proper backflow device to be installed on any watering system to prevent contamination of the supply; whether it be pump or city water. Check your local water authority for installation requirements & codes. In many rural areas; specific requirements for landscape irrigation systems may not be covered in local plumbing codes and/or enforcement may be limited. HOWEVER...limitation in local authority does not alter the basic requirement for protection of the potable water supply.

Febco FE850-200 Double Check Assembly Features and Benefits

  • All non-health hazard (nontoxic) connections including: irrigation systems; fire sprinkler systems; in-plant commercial and industrial plumbing.
  • Double check assemblies are not approved for backflow prevention of any toxic substance (liquid; solid; or gas).
  • A double check assembly consists of two spring loaded check valves; shut off valves on the inlet and discharge side of the check valves and small test cocks. Check valves allow water to flow in one direction only.
  • A 12 inch minimum clearance is recommended under the assembly.

Febco FE850-200 Double Check Assembly Specifications

  • Maximum Working Pressure: 175 PSI (1200 KPa)
  • Hydrostatic Test Pressure: 350 PSI (2400 KPa)
  • Temperature Range: 32F to 140F (0C to 60C)
  • End Connections: Threaded ANSI B2.1

Febco FE850-200 Double Check Assembly Materials

  • Valve Body: Bronze
  • Elastomers: Silicone
  • Springs: Stainless Steel
Febco U765-100 1 in. PVB Backflow Preventer w/ Union Ball Valve Ends 

Browse for more products in the same category as this item:

Febco Double Check Assemblies
  Built with Volusion