Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides.  Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing.  

• Three-year limited warranty
• Attractive appearance
• 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire
• Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting
• Clear tempered glass affixed at 10° angle for natural cleaning

• Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads
• Stainless steel retention clip affixed to socket to securely hold lamp in place
• 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire
• Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included
• 12 Volt system requires remote transformer, not included
• 20W PAR 36 Lamp is included with fixture