Hendrickson PR7030-1 1 inch FPT x 1 inch FPT High Flow with Low-Medium Outlet Pressure 30 PSI with 1 inch thread
The PR7000 PRESET PRESSURE REGULATOR is a high
flow regulator that has a range of 10 to 35 gpm*. This unique
regulator comes in a 90 degree angle configuration with a 1" FPT on
both inlet and outlet.
The new design allows the changing of the outlet pressure
simply by removing the cap and manually replacing the
spring. The springs are available in 6 pressures: 10, 15, 20,
25, 30 and 35 psi, all preset to exacting factory specifications.
The springs are stainless steel, protected by design in a dry
chamber where inlet water cannot enter. They are designed
to give even performances in all pressure ranges. (See
performance data on back)
The PR7000 is specifically designed for use in high flow
applications in agriculture, greenhouse, nursery and
The PR7000 is produced using the highest
quality materials. Consistency and quality are our number
one concern. Quality assurance testing for these aspects
as well as durability are ongoing at Hendrickson Bros
Features & Benefits
- Wide range of flows 1–35 gpm.
- 10, 15, 20, 25, 30 and 35 psi preset pressures available.
- High Strength ABS plastic construction.
- Pressure setting is changeable.
- 90 ° Angle Configuration.