A ruptured pipe or broken sprinkler that is left undetected can result in a substantial amount of damage. Plants and ground cover can be flooded; a slope can be eroded; even solid surfaces such as sidewalks or driveways can be undercut. The installation of a Flow-Clik can help identify a break before any damage can occur. The Flow-Clik is user-set to activate at a specified level of flow; once that level is exceeded; the electrical circuit is broken and the valves are shut off. As a result; the amount of water loss in the event of high external leakage would be substantially reduced.
Reduced costs for rupture-related repairs Unanticipated budget allocations kept to a minimum
Weather-proof interface panel provides system status “Overflow watchdog” provides constant update for any system
Compatible with all commercial and residential piping systems Large flow range provides complete flexibility
Customized calibration for precise system control Every irrigation system is set individually with a single push button
Multi-color LED provides system status Displays if power is applied and whether flow is acceptable
If a main or lateral line ruptures; or if sprinkler heads were broken or removed; and such problems went undetected; it could result in substantial landscape damage. Plants and groundcover can be flooded; a slope can be eroded; even sidewalks or driveways can be undercut. And this type of damage can occur just as easily on a simple residential system as on a top-of-the-line commercial system with institutional-grade components.
To monitor and shut off the flow of any irrigation system – large or small; existing or new – and have insurance against damage and potential liability issues; there’s no better low cost solution. Flow-Clik can be wired to any standard 24 volt system and this “catastrophic” protection can be added for a minimal cost.
Managing a network of irrigation controllers – on a single site or multiple sites – requires time-consuming work. Setting up and synchronizing irrigation controller operations can take hours of time. Plus, every time a program change needs to be made; or an irrigation system needs to be shut down for a special event; you have to physically travel to the sprinkler controller.
With the Irrigation Management and Monitoring System (IMMS); these hassles are removed; since the entire irrigation system can be monitored and controlled from the comfort of your office. Additionally; by communicating with localized irrigation sensors; the system can alert you to potential service problems such as a ruptured pipe or sprinklers that have been broken by vandals.
The centralized control of your irrigation controller network allows you to take advantage of the latest water saving benefits. Modify sprinkler controller schedules in real-time; taking into account daily and seasonal weather conditions and weather forecasts…shut down all systems during rain automatically or with just a few keystrokes…increase watering for thirsty annuals during hot days. Any and all changes can be made to each irrigation controller’s program in a matter of seconds.
In addition, the program’s reporting module allows you to monitor your water usage over time, both in total gallons used and estimated water costs. This will allow you to plan ahead for future needs and identify areas for improvement.
Saving time and saving water ultimately adds up to an even greater savings: that of your irrigation budget. The IMMS reduces your labor expenses; including the time it takes to travel from site to site and the time it takes to program and update irrigation controllers and verify system operations. Not to mention the fact that the IMMS is priced at a level that makes it affordable and not a luxury item. With the IMMS; you possess a powerful tool designed to manage and monitor your irrigation needs.
