 Freeze-Clik® Freeze Sensors Control irrigation system information during freezing temperatures. Imagine going to bed while the temperature is mild, then having your automatic irrigation system go on as usual while a freeze set in overnight...and you arise to see a landscape frozen over, with ice on adjoining driveways, sidewalks and even roadways a real possibility. In some areas, where temperature swings like this are all too common, the results are not only hazardous to the life of your lawn and plants, it can also be hazardous to those who may walk or drive nearby. With the Hunter Freeze-Clik you can prevent irrigation systems from activating by automatically stopping the flow of water when the outdoor temperature drops to a near freezing level. When the temperature rises above that set point, Freeze-Clik simply resets your irrigation system to its regular cycle. Easy to mount, easy to use, Freeze-Clik can also be used in conjunction with other weather sensing devices to guarantee the optimum effectiveness of a landscape irrigation system in virtually all types of weather. Features and Benefits | Installs simply and easily
No adjustment necessary Double-epoxy sealed sensing element
Aids the accuracy of temperature sensing Can be used in conjunction with other sensors
Enhances the overall automation of irrigation systems 5-year warranty
Your guarantee of dependable operation | Freeze-Clik® Specifications Models FREEZE-CLIK - Standard Freeze-Clik Dimensions Operating Specifications - Temperature set point: 3ºC +/- 2ºC (37ºF)
- Temperature differential: +/- 1ºC
- Electrical rating: 24VAC 6 amps
- UL listing: Class II Low Voltage (24 volt use only)
- Switching: Closed-above 3ºC; Open- below 3ºC (Reverse switching model)
- Included: 25 ft. of #20 two conductor wire; two mounting screws and detailed instructions
- UL listed
Special Usage Note: For landscape applications only. Not for crop protection. A freeze sensor should only be used as part of a sound irrigation system management program, including regular system visual checks. Hunter Freeze-Clik® In areas where winterizing is not necessary, but the threat of an occasional freeze is common, it's a wise idea to have a device that automatically shuts off irrigation systems at a pre-determined temperature. Just think if the sprinklers came on as usual and a freeze had set in, you could be faced with a landscape frozen over; with ice on adjoining driveways, sidewalks and even roadways a real possibility. The results are not only hazardous to the life of your lawn and plants, it can also be hazardous to those who may walk or drive nearby. With the Hunter Freeze-Clik you can prevent irrigation systems from activating by automatically stopping the flow of water when the outdoor temperature drops to a near freezing level. When the temperature rises above that set point, Freeze-Clik simply resets your irrigation system to its regular cycle. Easy to mount, easy to use, Freeze-Clik can also be used in conjunction with Hunter's other weather sensing devices to guarantee the optimum effectiveness of an irrigation system in virtually all types of weather. |
