I-20-HP-ADV Ultra Rotary Sprinklers

Pop-Up Height: 4"
Overall Body Height: 7 3/8"
Hunter I-20 Sprinklers come complete with factory-installed drain check valve for up to 7 feet elevation change which eliminates landscape damage from flooding and erosion.
Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

The rotor with heavy-duty commercial-grade features that's equally at home in a residential setting.

If you have ever desired the convenience of being able to use just one sprinkler rotor to cover all of your needs, here it is. Got a small area for which you don't want to create a separate spray zone? Is a portion of your landscape in sandy soil? Is the landscape a mix of shrub zones and expanses of grass? Does one part of the turf require a higher cut? With all the features on today's I-20 Ultra (most notably its ability to effectively cover a radius range from 17 up to 47 feet) there's a single-sprinkler alternative to stocking a variety of irrigation rotors and sprays. With over 20 different nozzle choices, the I-20 Ultra rotor can handle the full range of irrigation needs.

The Industrial-Strength Rotor for Residential and Commercial Irrigation Systems

If you're looking to upgrade over a typical residential grade irrigation rotor, this is where the search ends. No other irrigation rotor in its class gives you more. Like easy arc adjustment right at the top of the irrigation sprinkler, a heavy duty spring with reliable retraction, and a standard water-saving drain check valve that handles up to 10 feet of elevation change. Plus, we now include a rack of nozzles that includes both standard and low angle nozzles (the ideal solution for virtually any landscape situation), as well as the new FloStop(TM) feature that provides the added convenience of easily stopping water flow through a single sprinkler head without turning off the entire irrigation system. With its ultra-sturdy construction, rest assured you've got a product that's sure to endure - it's even protected by a full five-year warranty! But, for those who still want more, be sure to consider our stainless steel option.

Features and Benefits

Integral rubber cover Stays put to keep play areas safe Choice of 22 different nozzles Allows sprinkler to be custom fitted to all spacings from 18' to 47' FloStop� Control Allows stoppage of flow through an individual head while remainder of system is running Easy arc adjustment  40º - 360° Right at the top of the sprinkler Continuously improved, water-lubricated gear drive Backed by over a decade of proven reliability Extra-strong spring Reliable retraction every time Drain check valve for up to 10 feet elevation change Saves water, reduces liability Optional Stainless Steel Riser Added strength for the harshest conditions

I-10/I-20 Ultra Models

I-10 -Shrub
I-20 - Pop-up (10 cm)
I-20-6P - 6" Pop-up (15 cm)
I-20-HP - 12" Pop-up (30 cm)

Dimensions

• Overall height:
  I-10 - 3/4" (20 cm)
  I-20 - 7 3/8" (19 cm)
  I-20-6P - 9 7/8" (25 cm)
  I-20-HP - 17" (43 cm)
• 3/4 " female inlet NPT
• Exposed diameter: 1 3/4" (4 cm)

Operating Specifications

• Discharge rate: .9 to 14.3 gpm(0.20 to 1.86 m3/hr; 3.4 to 31.0 l/min)
• Radius: 17' to 47' (5.2 to 14.3 m)
• Recommended pressure range: 40 to 60 psi (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates:approximately .4" (10 mm) per hour at 50 psi (3.4 bars; 344 kPa) for spacing from 18' to 45' (7.6 to 13.7 m)
• Nozzle trajectory:
  standard  25°
  low-angle 13°
• Drain check valve for up to 10' (3.0 m) elevation change

Note: To ensure optimum nozzle performance, the irrigation rotor should be operated in the "Recommended pressure range." The irrigation sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.