I-40 Stainless Steel Rotary Sprinklers

I-40-ADS 

Pop-Up Height: 4"
Overall Body Height: 10 1/4"
Exposed surface diameter: 2"
Bottom: 1" female inlet NPT or BSP
Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

The top choice at sports facilities worldwide, a winner for parks and commercial systems as well.

With its unparalleled ability to deliver water accurately and efficiently at distances up to 74 feet, our top-of-the-line commercial irrigation rotor, the I-40, has become the sprinkler of choice at stadiums, diamonds, practice fields and other playing surfaces the world over…not to mention, parks, campuses and commercial sites, too! And why has it become such a favorite? Features, features, features. From the ProTech™ safety system to secondary nozzles that offer exceptional mid-range and close-in coverage, from a stainless steel riser to a heavy-duty retraction spring, from a factory-installed drain check valve with a 15-foot check height to convenient through-the-top arc adjustment…if you've got a lot of turf to take care of, we've got a lot of sprinkler to help you do the job.

Features and Benefits

ProTech™ safety system Small exposed heavy duty rubber cover and boot keeps playing areas safe Primary nozzle system: 6 interchangeable nozzles Uniform coverage with radius from 45 to 74 feet Dual opposing nozzle full-circle option Superior coverage for maximum efficiency Easy arc adjustment (40°– 360°) Up, down, wet or dry with through the top convenience Stainless steel riser and super-strong spring For long-term positive retraction Proven water-lubricated gear drive Time-tested and now improved for even longer life Patented VStat® self adjusting stator No stator rings required, drives with more power and adds years to irrigation sprinkler life Drain check valve for up to 15 feet elevation change Saves water, reduces liability High-speed version available For quick, light wetdowns

I-40/I-41 Group Models

I-40, I-41* – 4 " (10 cm) Heavy-duty rotor
I-42, I-43* – 4 " (10 cm) High-speed heavy-duty rotor
I-40-6P, I-41-6P* – 5 1/2" (14 cm) Heavy-duty rotor
I-42-6P, I-43-6P* – 5 1/2" (14 cm) High-speed heavy-duty rotor
* metric model number (bsp threaded nozzle)

Dimensions

• Overall height:
  I-40, I-41, I-42, I-43: 7 7/8" (20 cm)
  I-40-6P, I-41-6P, I-42-6P, I-43-6P: 10 1/4" (26 cm)
• Female inlet: 1" NPT or BSP
• Exposed diameter: 2" (5 cm)

Operating Specifications

• Discharge rate: 7.0 to 28.2 gpm(1.59 to 6.4 m3/hr; 26.5 to 106.7 l/min)
• Radius for I-40: 45' to 70' (13.7 to 21.3 m)
• Radius for I-40-ON: 52' to 76' (15.8 to 23.2 m)
• Radius for I-42: 41' to 65' (12.5 to 19.8 m)
• Recommended pressure range: 50 to 80 psi (3.4 to 5.5 bars; 344 to 551 kPa)
• Operating pressure range: 40 to 100 PSI (2.8 to 6.9 bars; 275 to 689 kPa)
• Precipitation rates: approximately .33" to .48" (8 to 12 mm) per hour
• Nozzle trajectory: 25°

Note: To ensure optimum nozzle performance, the irrigation rotor should be operated in the "Recommended pressure range." The irrigation sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.

Options Available

• The turf cup kit (part number 460000) for the I-40 or I-42 sprinkler allows the addition of a plug of living sod to the top of the riser. Perfect for areas where an invisible irrigation sprinkler is required.
• High-speed version (model: I-42/43)
• Dual opposing nozzle (full-circle version) I-40-36S-ON
• Reclaimed water cover
• Factory-installed nozzles
• Sub-Surface Stabilizer Flange for additional stabilization

KEY TO FEATURES:
ADS = Adjustable with Check Valve and Stainless Steel Riser
36S = Full-Circle with Check Valve and Stainless Steel Riser
ARS = Adjustable with Check Valve, Reclaimed Water and Stainless Steel Riser
3RS = Full-Circle with Check Valve, Reclaimed Water and Stainless Steel Riser
36S-ON = Full-Circle, Dual Opposing Nozzle, with Check Valve and Stainless Steel Riser
3RS-ON = Full-Circle, Dual Opposing Nozzle, with Check Valve, Reclaimed Water ID and Stainless Steel Riser