Home > Sprinklers > Sprinkler Rotors > Hunter Rotors > Hunter I-60 Rotors (50 - 66 ft) >

Hunter I60-ADS 3 in. Pop-Up Stainless Steel Adjustable Arc Rotor

Hunter I60-ADS Adjustable Arc Stainless Steel Rotor

Our Price: $70.00

Product Code: I60-ADS

Qty:

Description

Untitled Document

Sprinkler Warehouse! Lowest Prices, Free Shipping on Orders over $149, Fast Delivery!

Hunter I60-ADS Rotor

HUNTER I60 ROTARY SPRINKLER

The Hunter I-60 Rotor is efficient, heavy-duty and ready to take on your large turf job!

Have a low pressure system and not much of a budget? Then the Hunter I-60 Large Turf Rotor (Rotary Sprinkler) will meet your expectations. No need to purchase a pump....just the Hunter I-60 Rotor and let it handle your low pressure system. Now Hunter is offering you an affordable yet efficient way to operate. Use less water, eliminate the need to install large pipe. The Hunter I-60 is right for the job.

"A large turf irrigation rotor engineered to meet the demanding needs of systems with lower pressures and smaller budgets."

Installation (459 KB)

Product Info (2.41 MB)

Brochure and Nozzle Charts (150 KB)

Includes:
- 1 complete set of standard nozzles per rotor
- 1 Set of Instructions (1 per shipment)
- 1 adjustment tool (1 per shipment)
Patented Precision Distribution Control
Assures even coverage at low pressures without the need for a booster pump
6 color-coded nozzles
Truly uniform coverage and fast identification
Stainless-steel riser
Increased durability in harsh soil conditions
Easy arc adjustment (40 degrees - 360 degrees)
Up, down, wet or dry with through the top convenience
Heavy-duty, water-lubricated gear drive
Enduring reliability, year after year
Patented VStat self-adjusting stator
No stator rings required, drives with more power and adds years to irrigation sprinkler life
Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

Hunter I-60 ADS Nozzle Performance Chart

Pop-up height: 3" (8 cm)
Overall height: 8 3⁄8" (21 cm)
Female inlet: 1" NPT or BSP
Exposed diameter: 1 3/4" (4.45 cm)

Discharge rate: 6.5 to 20.4 GPM (1.48 to 4.63 m3/hr; 24.6 to 77.2 l/min)
Radius: 50' to 66' (15.2 to 20.1 m)
Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
Precipitation rates: approximately .29" to .52" (7 mm to 13 mm) per hour
Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the irrigation rotor should be operated in the "Recommended pressure range." The irrigation sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.