HUNTER MPR40 SERIES:

The Hunter MPR40 Series is water conservation at it's best!

Until now, the MP Rotator has been seen on many different spray bodies, but never has a spray body been created just for the Hunter MP Rotator. Introducing the Hunter MPR40, a spray body that optimizes the performance of the MP Rotator. It provides the perfect combination of Hunter's famous Pro-Spray body with a specially calibrated pressure regulator. This gives the Hunter MP Rotator a consistent 40 PSI output, meaning even coverage and optimal performance. These Pop-Up Spray Heads are sold body ONLY (nozzles not included). Nozzles purchased separately to allow you to choose exact pattern and radius (distance) that you need.

• Pressure regulated to 40 PSI for optimum efficiency with the MP Rotator.
• The extra tough co-molded wiper seal prevents leaks even at higher pressures.
• Two-piece ratchet design makes head adjustment quikcer and more precise.
• Heavy-duty body and cap construction with multi thread buttress design withstands the harshest environments.

• Overall height:
  MPR40-04-CV - 5 7⁄8" (15.5 cm)
  MPR40-06-CV - 8 3/4" (22.5 cm)
  MPR40-12-CV - 16 1⁄8" (41 cm)
• 1/2" female inlet NPT
• Exposed diameter: 2 1/4" (5.7 cm)

• Recommended pressure range: 15 to 100 PSI (1.0 to 6.9 bars; 103 to 689 kPa)
• Flow-by: 0 at 10 PSI (0.7 bars; 68 kPa) or greater;
  0.1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Check height: Up to 14' (4.3 m) elevation change