PGP Rotary Sprinkler
The world’s best selling residential and light commercial rotor sets the standards for an entire industry.

Why settle for second best when you can have the sprinkler by which everything else is measured. The PGP® is Hunter’s original product, the item that put the company on the map in 1981.

Hunter PGP's exceptional design and impressive performance placed the PGP Rotor a cut above back then, while continuous improvements and enhancements have allowed the PGP Rotor to remain the number one selling rotor in the world ever since.

With the superior ability to deliver even water distribution from precision engineered PGP Nozzles, this sprinkler is unequaled for reliability, durability, versatility, and value. With PGP's patented features and Hunter’s years of experience in gear-drive technology, it’s no wonder the Hunter PGP Rotor remains the professional’s choice.

PGP ROTARY SPRINKLER
PGP-ADJ Adjustable Arc Rotor

Pop-Up Height: 4"
Overall Body Height: 7 3/8"
Exposed surface diameter: 1 ¾"
Bottom: ¾" female inlet NPT

Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.

Integral rubber cover with membrane covered sockets Keeps dirt out, permanently installed Through-the-top adjustment with helpful symbols Easiest to adjust, wet or dry Quick Check Arc/Fast Forward For quick verification of arc stop points Complete set of interchangeable nozzles 12 standard or 7 low-angle nozzles for virtually any task Factory installed nozzles available Choose the convenience of pre-installed nozzles for large projects Radius adjustment of up to 25% Easy fine-tuning without changing nozzles Reversing full-circle and part-circle operation in one unit For fastest, hassle-free adjustment, 40°-360°, wet or dry Proven, long-life water-lubricated gear drive First introduced over 15 years ago and still continuously improved (U.S. Patent numbers 4,568,024 and 4,718,605) Advanced riser seal Industry’s most reliable and proven pressure-activated wiper seal Large dirty water screen Puts an end to nozzle clogging

• Overall height:
  PGS – 7 3/8" (19 cm)
  PGP – 7 3/8" (19 cm)
  PGH – 17" (43 cm)
• 3/4" female inlet NPT
• Exposed diameter: 1 3/4" (4 cm)

• Discharge rate: .5 to 14.1 gpm (0.11 to 3.20 m3/hr; 1.9 to 53.4 l/min)
• Radius: 22' to 52' (6.7 to 15.8 m)
• Recommended pressure range: 40 to 60 psi (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .4" (10 mm) per hour at 50 psi (3.4 bars; 344 kPa) for spacings from 25' to 45' (7.6 to 13.7 m)
• Nozzle trajectory: standard – 25°, low-angle – 13°

Note: To ensure optimum nozzle performance, the rotor should be operated in the "Recommended pressure range." The sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.

What Makes PGP the World’s #1 Gear Drive?

The PGP has been and continues to be the world’s best-selling gear-driven rotary sprinkler. But being first is not simply limited to sales figures. The PGP also holds the distinction of being the first sprinkler to give the irrigation industry some of the “taken for granted” features that continue to set it apart from the competition. Some of the Hunter PGP “Firsts” include:

• Through the top adjustment – wet or dry – no parts to remove, easy adjustment, precise
• Full rack of nozzles included with every head – allows you to custom-tailor sprinkler performance to the site’s needs
• Rubber cover standard – keeps dirt out, improves safety
  

It’s no coincidence…being first in developing technological advances has had more than a little to do with being first in product sales. No wonder products like the PGP have earned Hunter the reputation as “The Irrigation Innovators™.”