HUNTER SRS SPRINKLER SERIES
Hunter SRS Sprays are Durable and Versatile and it's a Solution that's Compatible with all Standard Nozzles

For the many who have been asking for just such a product, Hunter is pleased to present the solution for sprays that offers brand name quality at an economical price. The Hunter SRS combines Hunter technology with the exceptional versatility that comes from being compatible with virtually any standard female-threaded nozzle. You'll find the construction of the SRS is brawny and durable, highlighted by a rugged, flat body cap. The Hunter SRS – it's the ultimate in customer convenience from a name you can trust.

HUNTER SRS-06 SPRAY SPRINKLER

Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.

Rugged body cap design Stands up to heavy traffic in public areas Compatible with all standard nozzles Accepts popular female-threaded nozzles including Hunter adjustable-arc nozzles Heavy-duty UV-resistant wiper seal Assures long life at a wide range of water pressures Standard side inlet Featured on 6" and 12" (15 and 30 cm) models for installation convenience Adjustable pop-up stem position Ensures quick pattern alignment Strong stainless steel spring Ensures reliable retraction year after year

• Recommended pressure range: 15 to 70 PSI (1.0 to 4.8 bars; 103 to 482 kPa)
• Flow-by: 0 at 10 PSI (.7 bars; 68 kPa) or greater; .1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Precipitation rates: approximately 1.5" (38 mm) per hour
  

Note: To ensure optimum nozzle performance, the irrigation rotor should be operated in the "Recommended pressure range." The irrigation sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.