HUNTER RAIN-CLIK SENSOR:
The reliable rain sensor with instant shutoff.

Most rain-sensing devices must first accumulate a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that “accumulation time;” the system will continue to water; giving the appearance a precious resource is being wasted…exactly the opposite impression a municipality; a business or an upstanding citizen would like to convey. Only the Hunter Rain-Clik™; with its unique Quick Response™ feature; can command a controller to shut off immediately – not after a quarter- or a half-inch; but right when it starts to rain. And; unlike any of its competitors; the Rain-Clik can be mounted in a variety of ways: on a rain gutter; on conduit; with a telescoping extension to bring the unit away from an eave; or in the standard method on a flat vertical surface like a wall or fence.

• Hunter’s unique Quick Response™ feature
  No need for water to accumulate for shutoff
• Rugged Construction
  Heavy-duty polycarbonate housing and metal extension arm
• Set a maximum dry-out period
  Adjust the irrigation re-start to account for varying amounts of rain
• Maintenance-free patented sensing mechanism
  No callbacks — just set it and forget it
• Includes 25' of 20 gauge two-conductor wire
  Simple to add on to a new or existing installation
• Optional bypass switch
  Adds flexibility to the system
• 5-Year warranty
  Hunter backs up its products with the industry’s best guarantee

• Wiring: normally closed or normally open
• Time to turn off irrigation system: 2-5 minutes for the Quick Response™ feature
• Time to reset the Quick Response™ unit: 4 hours maximum under dry sunny conditions
• Time to reset: 3 days maximum under dry sunny conditions for the total rainfall compensation unit
• Switching capabilities: Single Pole Double throw - 24 volts 3 amps
• Operating temperature: 32°F - 130°F (0°C to 54°C)
• Vent ring allows for adjustment of reset delay
• UV colorfast and stable materials
• UL listed
• Optional gutter mount for Rain-Clik (order SGM)
• Freeze sensor shuts system off when temperatures fall below 37°F (Rain/Freeze-Clik Model)
• 24 volt; 3 AMP Switch

• 3.25" diameter x 2" high

Hunter Rain-Clik Rain Sensor Installation Details When it Rains; it Stops The rain sensors that are marketed today typically will allow an irrigation system to operate while it is raining; only shutting the system down after a quantity of rain has fallen. This can easily lead to public perception that such a system is wasting water. It may also cause a homeowner to think that his system is not functioning right; leading to a service call that the contractor will later tell him was unnecessary. But; within 2-5 minutes after it starts to rain; the Hunter Rain-Clik™ will interrupt the controller common circuit; keeping the system from operating for approximately 2 hours. Quick Response™ - it's a feature that no other rain-sensing device offers. Note: Mount Rain-Clik on any surface where it will be exposed to unobstructed rainfall; but not in the path of sprinkler spray.

Hunter Rain-Clik: The Ideal Money-Saving System Add-on is Now Available A rain sensor is an excellent item to sell as an addition to your customers’ irrigation systems. That’s because; for the small expense to install the accessory; a homeowner can realize substantial water savings over the life of the system. Most rain sensing devices need to accumulate a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. This means a system will continue to water as the rain comes down. But the Hunter Rain-Clik; with its unique Quick Response™ feature; will instruct a controller to shut off immediately when it starts to rain. What also sets Rain-Clik apart is the variety of ways the product can be mounted: on a flat vertical surface like a wall or fence; on a rain gutter; on conduit; or with the unit’s handy telescoping extension arm that brings the device away from an eave. Keep in mind that an increasing number of cities now require a rain- sensing device on all irrigation systems. And while some cities only call for the devices on new systems; many call for sensors to be added to existing systems as well. Address these needs today with a Hunter Rain-Clik; available at your local authorized Hunter distributor.