HUNTER XC SERIES CONTROLLERS
Entry-Level Residential Irrigation Controller with Extra Flexibility, Features, and Memory

The new Hunter XC presents handy water management control in a compact; user-friendly sprinkler controller that is capable of meeting the irrigation requirements for a wide range of residential landscapes. Simply put; the XC brings a whole lot extra to a small sprinkler controller. Like extra power…the XC offers a choice of 4 or 6-station models; each with plenty of might to operate one or two irrigation valves per station plus a pump start relay or master irrigation valve. Extra features…including global seasonal adjustment and a 365-day calendar to make water savings easier; plus a default system that permits retrieval of the original program entered into the irrigation controller. Extra flexibility…with three programs (each with four start times); multiple scheduling formats; and the ability to select sensor input by station. And extra memory…with a non-volatile on-board program backup and a high-energy lithium battery for timekeeping to assure you’ll never have to reprogram the irrigation controller due to power outages. The choice for those who demand outstanding reliability; the XC is where to turn for extra peace of mind.

• Easy dial programming
  Enhanced dial and push button programming makes the XC easy to operate
• Global seasonal adjustment (0% to 150%)
  Easy on-screen adjustment alters the amount of watering to accommodate changing weather conditions
• 3 independent programs with 4 start times each
  Accommodates a wide range of watering requirements
• Non-volatile memory
  Excellent insurance against unreliable power; retains current time; day; and program data
• Choice of independent day scheduling
  For maximum watering flexibility (select days of the week; true odd/even; or interval watering)
• Weather sensor compatible
  The XC is compatible with rain; freeze; wind and other micro-switch type weather sensors. Each station can be programmed individually to accept or override the weather sensor input.
• Easy-retrieve memory
  Ability to retrieve your preferred program; stored in backup memory
• Replaceable lithium battery (included)
  For backup timekeeping and to enable remote programming of the irrigation controller

• Indoor Model: 6 1/2" H x 5 3/4" W x 2" D (16.5 cm H x 14.6 cm W x 5 cm D)
• Outdoor Model: 8 5/8" H x 7" W x 3 3/4" D (22 cm H x 17.8 cm W x 9.5 cm D)

• Outdoor models; transformer with internal junction box
• Indoor models; 120VAC plug-in transformer
• 3 programs; A; B; C
• Start times: 4 per day; per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar or true odd/even programming with 365-day calendar clock
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 110VAC; 60 Hz
• Transformer output: 24VAC; 1.0 amps (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: .56 amps
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping; not required for program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with microswitch based sensors; displays when sensor is active
• Programmable sensor input by station
• Original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off ”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL/CE listed