HUNTER XC SERIES CONTROLLERS/TIMERS:

The Hunter XC Series Controller/Timer is a flexible, entry-level irrigation controller fit for a wide range of residential landscapes.

Hunter XC Series Irrigation Timers and Controllers are a compact solution to water management with a user-friendly interface that is capable of mastering all types of residential landscaping situations. The Hunter XC Series Controller is available in a choice of 4 and 6 station models with the ability to operate one of two valves per station as well as a pump start relay and master valve.

The Hunter XC Series Timer also features a 365-day calendar and global seasonal adjustment. It runs three programs, each with four start times, ability to select sensor input by station and more scheduling formats.

All in all, the Hunter XC Series Irrigation Controller / Timer is the ideal choice for those seeking reliable and flexible irrigation system control.

• Easy dial programming
  Enhanced dial and push button programming makes the XC easy to operate
• Global seasonal adjustment (0% to 150%)
  Easy on-screen adjustment alters the amount of watering to accommodate changing weather conditions
• 3 independent programs with 4 start times each
  Accommodates a wide range of watering requirements
• Non-volatile memory
  Excellent insurance against unreliable power; retains current time; day; and program data
• Choice of independent day scheduling
  For maximum watering flexibility (select days of the week; true odd/even; or interval watering)
• Weather sensor compatible
  The XC is compatible with rain; freeze; wind and other micro-switch type weather sensors. Each station can be programmed individually to accept or override the weather sensor input.
• Easy-retrieve memory
  Ability to retrieve your preferred program; stored in backup memory
• Replaceable lithium battery (included)
  For backup timekeeping and to enable remote programming of the irrigation controller

• Indoor Model: 6 1/2" H x 5 3/4" W x 2" D (16.5 cm H x 14.6 cm W x 5 cm D)
• Outdoor Model: 8 5/8" H x 7" W x 3 3/4" D (22 cm H x 17.8 cm W x 9.5 cm D)

• Outdoor models; transformer with internal junction box
• Indoor models; 120VAC plug-in transformer
• 3 programs; A; B; C
• Start times: 4 per day; per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar or true odd/even programming with 365-day calendar clock
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 110VAC; 60 Hz
• Transformer output: 24VAC; 1.0 amps (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: .56 amps
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping; not required for program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with microswitch based sensors; displays when sensor is active
• Programmable sensor input by station
• Original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off ”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL/CE listed