HUNTER ICR-KIT IRRIGATION REMOTE CONTROL SYSTEM:
Reliable and powerful long-range, multi-site sprinkler remote control.

For shopping centers, industrial complexes, college campuses, condominiums and other expansive sites, if an irrigation remote control is going to work it needs the power to cover long-range distances. The ICR has a signal strong enough to go through obstructions such as buildings, walls or trees and communicate with an irrigation controller for a half mile or more. And, when nothing is in its path, the ICR can function up to two miles from the irrigation controller. The ICR is a single unit that can be carried from job to job and used to remotely access dozens of different irrigation systems (including any Hunter irrigation controller that operates with a SmartPort® system). That eliminates going back and forth to the irrigation controller to start or stop a cycle during maintenance or installation. And, the task of winterizing an irrigation system becomes a one-person job instead of two.

• Over 1/2 mile typical range
  Control sprinklers, valves and pumps without going directly to the controller
• Compatible with all Hunter irrigation controllers
  Designed to work with all Hunter ICC, Pro-C and SRC controllers through a SmartPort connection
• Large LCD display, push button operation
  User-friendly features make the remote simple to use
• Variable remote activated station run times
  Allows a one time change in station run time duration without affecting the regular program
• Operates on 4 AA batteries for up to a year
  Automatic shutoff extends battery life when not in use
• 128 different programmable security codes
  Allows multiple ICR receivers to be used in the same area
  

• Address range: 0 to 127
• Maximum stations supported: 48
• Run times: Eight settings from 1-30 minutes
• Range: Up to 1/2 mile obstructed; up to 2 mile line of sight
• Temperature: 0-150° F
• Humidity: Up to 100%
• Transmitter: 4 AA alkaline batteries (included)
• Receiver: 24VAC; 0.05 Amps from controller through a SmartPort® connector
• System operating frequency: 27 MHz band
• Install SmartPort up to 50' from controller (use SRR-SCWH shielded cable wiring harness)
• No FCC license required

• Transmitter (w/o antenna):
  6 1/2" H x 3 1/4" W x 1 1/4" D (16.5 cm H x 8.3 cm W x 3.2 cm D)
• Receiver (w/o antenna):
  6 1/4" H x 3" W x 1 1/4" D (15.9 cm H x 7.6 cm W x 3.2 cm D)

Want to Effectively Manage a Large Site? ICR Remote Control is the Answer

Contractors from all over have been asking for one thing in an irrigation remote control: a product that is strong enough to communicate over long distances. The ICR Long Range Remote is the answer and it’s now available for purchase.

The ICR is the ideal accessory for irrigation systems at expansive sites such as industrial parks; university campuses; shopping centers; and apartment or condominium complexes. The new remote control is powerful enough to deliver peak performance even when trees; buildings or walls stand between you (with the remote in hand) and the location where the irrigation controller is mounted; up to a half mile away. With no obstructions in the path of the remote’s signal; communication with the irrigation controller is possible for up to one mile.

Featuring rugged and water-resistant construction; the ICR offers simple push-button operation and a large LCD display for easy viewing. Thanks to automatic shut-off when the unit is not in use; it can operate on a single 9V battery for up to a year. Best of all; it’s the most affordable long-range irrigation remote control on the market.

A single ICR can interface with any Hunter irrigation controller that comes equipped with a SmartPort® plug (SRC; Pro-C; ICC); enabling the remote to be carried from job to job for accessing dozens of different irrigation systems. Contractors will find the ICR perfect for making routine maintenance and winterization into simpler tasks. There’s no need to walk back and forth from the sprinkler controller to stop and start the system; and one person can do the job instead of two.

All in all; the ICR is the essential contractor’s tool.

Of course; specifiers will love it; too. After all; irrigation efficiency is one thing that designers strive for and the ICR is a real time-saver for the on-site crew responsible for irrigation maintenance and repair.

SmartPort® is Easy to Install Indoors...
	This installation is ideal for situations when the SRR system will be left permanently connected to the irrigation controller in an indoor area.
	This installation is ideal for situations where a contractor desires the ability to access and operate an irrigation controller from outside of a locked building or garage.
	However; the SRR receiver must be removed from the SmartPort™ and the weather resistant cap placed back on the outlet after each use. Port can be mounted up to 50 feet from the irrigation controller.