MICRO-LINE 1/4" NON-PC DRIP LINE:

The micro-line drip line is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The in-line dripper is built with a large filter along the cross section of the dripper to ensure that particles on the bottom of the micro tubing do not enter the labyrinth, ensuring trouble free operation and a long life.

Features & Benefits

Used for above or below the surface or under mulch for a variety of applications such as containers and narrow plantings
Large labyrinth water passage and turbulent flow help reduce clogging
Inlet filter helps to prevent particles from entering the drip emitter labyrinth path
Two (2) outlets per dripper ensure less chance of clogging
Resistant to chemicals and fertilizers commonly used in landscape applications
Used with 1/4" (5 mm) barbed fitting
Flexible tubing for easy installation
Color coded labels for easy identification
Made of low-density, UV-resistant, 7510 polyethylene Fingerprint™ resins

Materials

Liner: low-density polyethylene

Specifications

Flow rates: .52 GPH @ 15 PSI (2.1 l/h)
- Dripper color code: blue
Operating pressure: 7-20 PSI (.5-1.4 BAR)
Dripline color code: black or brown
Dripline spacing: 6", 9" or 12" (15 cm, 22 cm, or 30 cm)
Drip tubing size: 1/4" (5 mm) with .170 ID x 240 OD (4 mm ID x 6 mm OD)
Minimum bending radius: 2' (60 cm)
Available in 100', 500', 1000' and 3000' Coils (30 m, 150 m, 300 m, 900 m)
Filter requirement: 155 Mesh

Model	Description	Color
ML-106	100', 6" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Black
ML-106B	100', 6" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Brown
ML-112	100', 12" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Black
ML-112B	100', 12" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Brown
ML-1006	1000', 6" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Black
ML-1006B	1000', 6" Spacing .52 GPH @ 15 PSI .170 ID x .250 OD	Brown