CR500 Series™ Sprinkler Rotor

Pop-Up Height: 5"
Overall Body Height: 7.6"
Bottom: 3/4" threaded NPT inlet
Radius of Throw: 32 - 50 ft.
Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

Convenience-enhancing features include an easy-to-see arc indicator for simple adjustment from 40° to 360°, a 5-inch pop-up height, automatic arc return if nozzle turret is tampered with, and a riser pull-up slot for easy nozzle exchange. The CR500 sprinkler rotor was designed with durability in mind. A heavy-duty retract spring, pressure-activated seal and sturdy trip mechanism all ensure long-term, reliable operation.

The CR500 sprinkler rotor designed to meet the specific needs of the contractor.

• 5" pop-up to nozzle
• Top arc indicator for simple adjustment
• Nine interchangeable, reusable standard nozzles: one pre-installed and eight on a nozzle tree
• Nine interchangeable, reusable standard nozzles: one pre-installed and eight on a nozzle tree
• Automatic arc return to pre-set arc if nozzle turret is tampered with
• Part- and full-circle coverage in one head
• Continuous rotation provides even coverage when set at 360°
• Riser pull-up slot for easy nozzle removal and insertion
• Arc adjustment from 40° to 360°
• Standard rubber cover
• Stainless steel radius adjustment screw allows up to 25% radius reduction
• Heavy-duty retract spring
• Pressure-activated seal
• Robust trip mechanism
• Serviceable seal, seal retainer, cap, spring, screen and riser assembly