OmniReg Modular Pressure Regulator

OmniReg Model: OMR-30
Pressure regulation:  5 to 30 psi (you can dial the valve outlet pressure to be between 5 to 30 psi)

This pressure-regulating device enables the user to quickly and
accurately set the exact downstream pressure required for any
application

Applications

This model fits the following Irritrol Valves:

• 100 Series (Century Plus) Valves
• 700 Series (UltraFlow) Valves
• 200B Series Valves
• 311A Series Valves
   

Key Features and Benefits

• Maintains constant downstream pressure, regardless of widely varying inlet pressure. For consistent operation of heads.
• One model fits all heavy-duty commercial 100 Series, 700 Series, 200B and 311A Series valves.
• Requires only 1 GPM to operate. Ideal for low-flow applications
• “Drop in” installation is fast and easy, requiring tightening of only two capture screws.
• Clearly marked dial settings permit precise control of downstream pressure.
• Desired pressure may be set with water on or off.
• Delivers an accuracy of +/- 3 psi
• Low-profile design permits use in applications with limited space.
• Schrader valve test port is easily accessible for in-line use.
• Manufactured of heavy-duty, corrosion-resistant glass-filled nylon.
• Stainless steel and brass hardware.
• Vandal cap to avoid unauthorized use.

Operating Specifications

• Flow Range: 1 to 300 gpm
• Inlet pressure range: Up to 200 psi
• Pressure regulation: OMR-30: 5 to 30 psi, OMR-100: 5 to 100 psi
• Inlet pressure to be 10 psi greater than outlet pressure

Specifying information