King Innovation - Leak-B-Gone - PVC Leak Stopper Rings are a 60 second solution to leaking PVC joints. Easy installation with no tools required. Provides 360° leak protection.
Leak
Stopper Rings:
Ideal for stopping leaks at joints and fittings
without the need of tools or breaking the pipes apart.
Leak stopper rings are a permanent solution to leaking pipes and fittings. In fact, there is no cutting pipes or replacing joints. Leak stopper rings provide a dependable waterproof, leakproof seal you can be confident your pipes will be leak free.
·Turn off water to the system or the section you
will be working on
.
·Wait for water to stop leaking from the joint (remove
nearby sprinkler head if necessary to alleviate pressure quicker.)
·Dry off the area around the leaking joint
·Apply an even coating of primer to the area
where the PVC pipe enters the fitting and allow it to dry. Then apply a
generous coating of cement/glue on top of the primer.
·Open the new, unused Leak-Stopper ring and work it over the
PVC pipe, snapping it closed when its on.
·Slide the ring along the pvc pipe till it sits
flushly against the leaking joint
·Apply and hold even pressure to the Leak stopper ring while the glue cures
·Allow the ring and glue to sit and cure for at
least 30 seconds before turning back on the water.
