MICRO-LINE 1/4" NON-PC DRIP LINE

The micro-line drip line is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The in-line dripper is built with a large filter along the cross section of the dripper to ensure that particles on the bottom of the micro tubing do not enter the labyrinth, ensuring trouble free operation and a long life.

• Small diameter micro line can be used for above or below grade or under mulch for a variety of applications such as containers and narrow plantings
• Small dripper size with large water passage labyrinth and turbulent flow helps reduce clogging
• Non pressure compensating drip line
• Large inlet filter along the length of the dripper prevents particles from entering the line
• Two outlets per dripper ensure less change of clogging
• Resistant to chemicals and fertilizers commonly used in landscape applications
• Can be used with any 1/4" barb fitting
• Flexible tubing for easy installation
• Used with low density, UV resistant, 7510 polyethylene with Finger Print.

• Flow Rates and Dripper Color Code:
  • .57 GPH - Color code blue
• Operating Pressure: 7-20 PSI
• Drip Line Color Code: Black or Brown
• Drip Line Spacing: 6" or 12"
• Drip Tubing Size: 1/4" with .170 ID x .250 OD
• Minimum Bending Radius: 2'
• Available in 100' and 1000' coils
• Filter Requirement: 155 Mesh

• Liner: low-density polyethylene