HUNTER (WALLA WALLA) MP ROTATOR NOZZLES:

The Hunter MP Rotator is a unique, revolutionary, water-conserving product that is unlike anything in the irrigation industry.

With technology that is second to none, Hunter has developed an ultimately designed, feature packed nozzle that provides superior efficiency at a lower cost. The Hunter MP Rotator is a multi-stream rotor in proportion to the size of a spray nozzle. This revolutionary product will fit any conventional spray head body, therefore transforming into matched precipitation at any radius and arc. If you desire to conserve water and increase effieciency, then the Hunter MP Rotator is right for you.

• A Water Conservation Tool
  • Multi-trajectory rotating streams provide unmatched uniformity
  • Automatic matched precipitation even after arc & radius adjustment
  • Low application rate reduces runoff on slopes & tight soils
• Proven Durability & Reliability
  • Rotator Technology proven in demanding agricultural conditions since 1987
  • One moving part
  • Patented "double-pop" flushes on start-up and shut-down without increasing spray head flow-by
• Simple Adjustments
  • Easy arc adjustment
  • Easy radius adjustment - up to 25%
  • No need to change nozzle to maintain matched precipitation
  • Removable inlet filter for easy cleaning
• Simplify Design & Installation
  • MP1000, MP2000 and MP3000 can be combined on the same zone
• Performance
  • The MP1000 Rotator is a 8-15' (2.5-4.6 meter) sprinkler (including the 25% radius reduction* capability) that fits any conventional spray head body or shrub adapter.
    * To achieve maximum radius reduction with any MP Rotator model use a 30 PSI (2 BAR) regulating spray body.
• Advantages
  • Higher uniformity - even after radius reduction
  • Superior wind resistance
  • Reduced misting at higher pressure
  • Outstanding close-in water
  • Lower application rate - less runoff
  • Wider operating pressure range
  • Lower system cost - ability to put more heads per zone or use smaller pipe size

Brochure (1.32 MB) Tech Spec (2.49 MB)

The MP Corner is an 8-15' (2.5-4.6 meter)sprinkler designed for tight corners that are difficult to irrigate properly with conventional sprinklers. It has an adjustable arc from 45 degrees to 105 degrees, maintains MPR at any arc, any radius and can be placed on the same zone with any other MP Rotator model.

How do you use the MP Rotator?
The MP Rotator Nozzle is designed to attach to a pop-up sprinkler spray body to create the MP Rotator sprinkler.
In other words, you purchase a MP Rotator Nozzle and screw it to the top of your favorite brand sprinkler spray body. Once attached to the spray body, you now have a complete rotor sprinkler!

How do you know which MP Rotator to pick?
You pick which MP Rotator Nozzle based on the distance you want to throw, the spray pattern you want to cover, and the type of sprinkler body you will be attaching it to. Female threaded MP Rotator Nozzles fit the following brands of sprinkler bodies: Rain Bird, Hunter, Nelson, Irritrol, and WeatherMatic. Male threaded MP Rotator Nozzles were designed to only fit Toro brand sprinkler bodies.