The Hunter MP Rotator is a unique, revolutionary, water-conserving product that is unlike anything in the irrigation industry.
With technology that is second to none, Hunter has developed an ultimately designed, feature packed nozzle that provides superior efficiency at a lower cost. The Hunter MP Rotator is a multi-stream rotor in proportion to the size of a spray nozzle. This revolutionary product will fit any conventional spray head body, therefore transforming into matched precipitation at any radius and arc. If you desire to conserve water and increase effieciency, then the Hunter MP Rotator is right for you.
Brochure (1.32 MB)
Tech Spec (2.49 MB)
The MP Left & Right Strips irrigate an area 5' x 15' (1.5-4.6 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .19 GPM (.72 LPM). When the radius is reduced the pattern is 4' x 12' (1.2-3.7 m). Flow rate at rectangular spacing = .14 GPM (.53 LPM).
The MP Side Strip irrigates a strip 5' x 30' (1.5-9.1 m) at 30 PSI (2.1 bar) at full radius. Flow rate at rectangular spacing = .38 GPM (1.44 LPM). When the radius is reduced the pattern is 4' x 24' (1.2-7.3 m). Flow rate at rectangular spacing = .27GPM (1.02 LPM)
How do you use the MP Rotator? The MP Rotator Nozzle is designed to attach to a pop-up sprinkler spray body to create the MP Rotator sprinkler. In other words, you purchase a MP Rotator Nozzle and screw it to the top of your favorite brand sprinkler spray body. Once attached to the spray body, you now have a complete rotor sprinkler! How do you know which MP Rotator to pick? You pick which MP Rotator Nozzle based on the distance you want to throw, the spray pattern you want to cover, and the type of sprinkler body you will be attaching it to. Female threaded MP Rotator Nozzles fit the following brands of sprinkler bodies: Rain Bird, Hunter, Nelson, Irritrol, and WeatherMatic. Male threaded MP Rotator Nozzles were designed to only fit Toro brand sprinkler bodies.
