View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy


Skydrop Ultimate Smart Controller

  Home > Sprinkler Pumps > Pump Start Relays >

  Munro MPLC2410 SmartBox Motor Overheat Protection Pump Start Relay
Munro MPLC2410 SmartBox Motor Overheat Protection Pump Start Relay
 
Our Price: $795.00


Product Code: MPLC2410
Qty:

Description
 
Untitled Document
Munro MPLC2410 SmartBox Pump Start Relay  
Munro MPLC2410 SmartBox Pump Start Relay


Product Manuals
Brochure

360 Degree Product View
Not Available
Performance Charts
Not Available
Product Information

MUNRO MPLC2410 BASIC SMARTBOX PUMP START RELAY WITH CODE-COMPLIANT THERMAL PROTECTION & PRESSURE SENSOR FOR 24VAC SPRINKLER TIMERS:

This model is for 10 HP pumps ONLY.

A pressure is built up in the volute case and discharge of a pump when it is working. If this pressure does not exist, there is a problem within the pumping system.

The SmartBOX ™ monitors this pressure through the use of a pressure sensor located on the discharge side of a pump. At the beginning, or anytime during a zone cycle, if water is not available the pressure will drop within the pump and the pressure sensor will signal a time delay to begin counting. If pressure has not recovered over the timer cycle, the pump shuts down to save itself before damage occurs.

The resetting of the pressure sensor is automatic. The next cycle after an electrical signal shut down will have the same opportunity to build pressure. Since the sensor measures lack of pressure, as long as the pump is able to rebuild and maintain pressure, the pump will be allowed to run normally.

Features & Benefits
  • Completely automatic and hands-free pump protection.
  • Bridges the gap between 24 volt lawn controllers and 110/220V pump motors.
  • Serves as a Pump Start Relay while offering low
    pressure shut-down protection. Activates
    shut-down sequence at 20 psi discharge pressure
  • MPLC2410: For all single phase 10 HP pumps
  • Added feature of automatic thermal overload protection - shuts pump down if it starts pulling too many amps
  • Heat code number: E70
  • Color coded wiring for easy installation
  • ALL MUNRO RELAYS & PUMP PROTECTION SYSTEMS ARE UL LISTED as ENCLOSED INDUSTRIAL CONTROL PANELS
  • ALLMODELS ARE HOUSED IN NEMA 3R WEATHERTIGHT ENCLOSURES WITH "BAKED-ON" POWDER COATING OR STAINLESS STEEL FOR LONG LIFE IN DIFFICULT ENVIRONMENTS
SmartBox Protection
  • Serves as a Pump Start Relay while offering low pressure shut-down protection. Activates shut-down sequence at 20 psi discharge pressure
  • Added feature of automatic thermal overload protection - shuts pump down if it starts pulling too many amps
  • Switches lawn controller to a domestic water
    alternative if pump's primary source water is
    not available** NOTE ~ CHECK WITH YOUR LOCAL HEALTH DEPARTMENT FOR REGULATIONS AND REQUIREMENTS FOR BACKFLOW PREVENTION

Munro SmartBox Pressure Sensor Features

Munro Smart Box Models:




Browse for more products in the same category as this item:

Sprinkler Pumps > Pump Start Relays
Munro Pumps
 
   
  .