• 6000
  Standard
  
  
• 6001
  Shrub head
  
  
• 6002
  Heavy-duty spring; anti-drain valve
  
  
• 6005
  Stainless steel sleeve; heavy-duty spring; anti-drain valve; locking screw
  
  
• 6006
  6000 with a 6090 cap
  Purple - nonpotable water
  
  
• 6007
  6000 with a #7 nozzle installed
  
  
• 6012
  12" High-Pop; heavy-duty spring; anti-drain valve
  

• NIR² feature (Nozzle Insertion/Radius Reduction) on all models eliminates the need to remove the cap for nozzle adjustments
• Eight interchangeable Acu-Cover® nozzles--ranging from 1.0 to 9.5 gpm
• Seven optional low-angle nozzles (13°) for windy areas or for throwing under trees
• Highly reliable water-driven gear motor (over 200 million gear stacks produced)
• Pro 6012 pops up a full 12". Ideal for shrubs and ground cover areas; at the base of hillsides where risers are not appropriate and where liability is a concern
• Click-Set® collars are quick and easy to adjust
• Continuous 360° rotation or part-circle adjustable 40° to 310°
• Ratcheting slip clutch protects gears and motor from damage while adjusting turret for part-circle adjustments - wet or dry
• Wrench; piston clamp and installation instructions included (Model 6001 has no clamp)
• Bypass valve reduces pressure loss and standardizes rotation speed regardless of nozzle size.
• Optional lavender rubber cover identifies reclaimed water site - molded in - Reclaimed Water - Do Not Drink - in English and Spanish (6090).
• 5 year warranty on materials and workmanship

• Operating range:
  20-65 psi (6000; 6001)
  25-65 psi (6002; 6005; 6012)
  
  
• Maximum pressure: 75 psi
  
  
• Discharge: 1.0 to 9.5 gpm
  
  
• Spray trajectory: 25° (13° optional)
  
  
• Pop-up height:
  4" (6000; 6002; 6005)
  12" (6012)
  
  
• Body height:
  7-1/2" (6001)
  7-3/8" (6000; 6002; 6005)
  16-7/8" (6012)
  
  
• Exposed cap diameter: 1-7/8"
  
  
• Cap diameter: 2-7/8"
  
  
• Type of cap:
  rubber (6000; 6002; 6005; 6012)
  plastic (6001)
  
  
• Inlet size: 3/4" female (NPT and BSP)
  
  
• Screen mesh: .045 sq. in./1150 micron
  
  
• ADV comes with 6002; 6005 and when installed will hold back up to 10° difference in elevation
  
  
• # per box: 20

Cutaway

1. Rubber cover on pop-up models is safe and vandal resistant. All models are designated with model number stamped in rubber cover for easy identification.
   
   Ribbed case on the 6500-ADV series provides stability in loose soil.
   
   
2. Vandal-resistant optional locking screw is available on all models. Standard on 6005's.
   
   
3. Double-lipped wiper seal and stainless steel retraction spring reduce unnecessary service calls by assuring positive retraction; even in sandy soils
   
   
4. Patented Click-Set disk is adjustable in part-circle patterns in 5° increments. Memory ring resets pattern even if sprinkler is turned outside set pattern.
   
   
5. High-torque planetary gear motor is water-lubricated to provide oil-free; quiet; reliable performance.
   
   
6. Large area filter protects working parts with less frequent cleaning.
   
   
7. ADV available on all models (except 6001); shipped with 6005.