Pro 6300 Series
6304

Pop-Up Height: 4"
Overall Body Height: 5 7/8"
Bottom: ½" female threaded inlet
These Pop-Up Spray Heads are sold body ONLY (nozzles not included).
Nozzles purchased separately to allow you to choose exact pattern and radius (distance) that you need.

Note: If the overall height of spray head is too tall for your application; you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

PRO 6304 6302 - 2-1/2" pop-up 6304 - 4" pop-up 6306 - 6" pop-up 6312 - 12" pop-up Features Spray heads accept all standard female thread pop-up spray nozzles Flush cap helps flush the system and ease nozzle installation ADV models feature a heavy-duty spring and anti-drain valve to hold back up to a 10-foot elevation difference - ideal for use in sloped areas Precise spray patterns eliminate wasted water and dry spots. ABS plastic material; used on all pop-up bodies and nozzles; is proven strong and tough in sprinkler applications. Matched precipitation nozzles apply water at the same rate regardless of arc. Specifications Operating range: 15-30 psi Optimun working pressure: 30 psi Maximum pressure: 30 psi Sealing pressure: <10 psi Pop-up height: 2-1/2" (6302) 4" (6304) 6" (6306) 12" (6312) Body height: 3-1/2" (6302) 5-7/8" (6304) 7-7/8" (6306) 15" (6312) Flush rate: 0.2 gpm Inlet size: 1/2" female Screen mesh: .031 sq. in./790 micron # per box: 100 (6302; 6304; 6306) 50 (6312) Multi-Arc™ nozzle has adjustable arc patterns ranging from 25-degrees to 360-degrees and are color coded by radius for easy identification. Cutaway Stainless steel adjustment screw reduces radius and will not rust. Dome design cap flushes sand and debris away from piston. Double-lipped wiper seal ensures that sand and debris are kept out of the body and seal. One-piece filter screen and seat ensure the reliability and quality of the spray pattern. Friction collar cuts installation time and allows 360Ã?Â?Ã?° adjustment of the piston to align pattern exactly. Stainless steel retraction spring assures positive piston retraction. 1/2" bottom inlet is standard on all models (additional side inlet on 12" models). Anti-drain valve and heavy-duty spring (Pro 6400-ADV) helps eliminate low head drainage and puddling. Holds back up to 10' difference in elevation.