• 7901; 7916 (BSP)
  Manual internal bleed 1" globe
  
   
• 7911; 7917 (BSP)
  Manual internal bleed 1" globe with flow control
  
   
• 7931
  Manual internal bleed 1" angle with flow control
  
   
• 7941
  Manual internal bleed 1" angle

• Glass-reinforced nylon prevents leaks and breaks
• Stainless steel plunger and spring prevent corrosion
• Manual internal bleed keeps valve box dry
• Fabric-reinforced diaphragm increases durability
• Body and bonnet made of glass reinforced nylon to prevent leaks and breaks
• Simple valve configuration and design; few moving parts
• Solenoid has stainless steel plunger and spring to prevent corrosion
• Manual internal bleed keeps valve box dry
• Bayonet-mounted bonnet with captured diaphragm for quick and easy servicing
• Fabric reinforced diaphragm for increased durability
• Easy-to-use flow control permits manual adjustment of water flow rate (does not apply to models 7901; 7916)
• 5 year warranty on materials and workmanship

• Flow range: less than 1 to 30 gpm
  
   
• Minimum pressure: 10 psi
  
   
• Maximum pressure: 150 psi
  
   
• Input: 24V AC
  
   
• Inrush current: 0.50 amps or less
  
   
• Holding current: 0.23 amps
  
   
• Size:
  4"L x 2-3/4"W x 5"H (7901; 7911)
  3-3/4"L x 2-3/4"W x 5-7/8"H (7931; 7941)
  
   
• # per box: 20

Cutaway

SPECIFICATIONS

Pro 7900 Series 1" Valves

The solenoid actuated remote control valve shall be of normally closed design. Inlet and outlet connections shall be 1" female NPSF. Body configuration shall be straight-through globe (angle) style. The valve shall operate at pressures from 10 to 150 PSI with fluid temperatures up to 125 degrees F.

The valve body and bonnet shall be constructed of glass reinforced nylon. The bonnet shall be bayonet-mount design so that the bonnet; diaphragm and solenoid can be removed in one assembly without removing bolts from the body. Bolts will be con­structed of stainless steel.

The fabric-reinforced diaphragm shall be of one piece molded construction. The diaphragm shall remain captured to the bonnet when the bonnet is removed.

A hand-actuated internal bleed shall vent water to downstream piping. A hand-actuated flow control (Models 7911 and 7931) knob shall reduce water flow from full open to close in less than three complete turns.