View Cart Checkout
 

Order within 0hrs 0mins for same-day shipping!
*Not available with backorder/drop-ship items. See Shipping Policy



  Home > Tools > Pipe Tools > Soldering Tools & Torches > Solder >

  Oatey 23000 1/2 Lb. 0.117 Gauge Silver Lead Free Plumbing Solder
Oatey 23000 .117 Gauge Silver Lead Free Plumbing Solder (1/2 lb.)
 



Our Price: $16.75
Sale Price: $14.88
You save $1.87!


Product Code: 23000
Qty:

Description
 
Untitled Document
Oatey 23000 Lead Free Wire Solder
Common Applications

Oatey Silver Lead Free Plumbing Solder is recommended for
use on potable water systems for sweating joints in a copper
water distribution system. Silver Lead Free Solder is not recommended for use on aluminum.

Consult Oatey Technical Department for applications not specifically referenced above.

Precautions

Read all cautions and directions carefully before using this
product. Apply flux with brush- do not apply with fingers.
Wash hands thoroughly after use and before eating. Wear
safety glasses with side shields and rubber gloves. EYE AND
SKIN IRRITANT. HARMFUL IF SWALLOWED. VAPOR MAY BE
HARMFUL. Use only in well ventilated area. Eye or skin
contact may cause intense irritation and injury. In case of
contact with eyes or skin, flush with water and seek medical
attention immediately. If inhaled, get fresh air and seek
medical attention if ill feelings persist. KEEP OUT OF REACH
OF CHILDREN.

Refer to material safety data sheet for more information.
For emergency first aid help, call 1-877-740-5015.

Product Manuals
Instructions
Submittal Sheet

Performance Charts
Not Available

OATEY 23000 .117 GAUGE SILVER LEAD FREE PLUMBING SOLDER (1/2 LB.):

Oatey Silver Lead Free Plumbing Solder is recommended for use on potable water systems
for sweating joints in a copper water distribution system. Silver Lead Free Solder is also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping. Silver Lead Free Solder is not recommended for use on aluminum.

Directions for Use
  1. Cut the pipe to the exact length required using a tube cutter. Be sure the pipe is cut square.
  2. Remove all burrs on the inside and outside of the pipe surface with a reamer tool.
  3. Remove all oil, grease and oxide corrosion
    from the surface of the piping to be joined using Oatey Abrasive Sandcloth, Utility Brushes or Nylon Grit Pads. The joining surfaces must be clean before soldering.
  4. Apply a small amount of approved flux to the pipe and fitting surface. Proper fluxing is important because the flux promotes the flow of the filler metal.
  5. Insert the pipe end into the fitting.
  6. Heat the joint area, using caution not to overheat the joint. Feed the solder wire into the
    joint. When the solder wire has drawn around the entire joint, remove the heat. When soldering process is complete, allow the joint to cool undisturbed. When joint is cool, remove any flux residual with a damp cloth.
  7. Silver Lead Free Solder is not recommended for use on aluminum.
Ingredients (CAS Number)
  • Tin (7440-31-5)
  • Copper (7440-50-8)
  • Bismuth (7440-69-9)
  • Silver (7440-22-4)
Physical / Chemical Properties
  • Alloy Composition: Tin, Copper, Bismuth, Silver
  • Appearance: Silver Solid Wire
  • Melting Range: 415° F to 455° F
Compliance & Listings
UPC
IAPMO Listed. Meets Military Specification QQ-S-571E. Meets ASTM B-32.



Browse for more products in the same category as this item:

Tools > Pipe Tools > Soldering Tools & Torches > Solder
Oatey
 
   
  .