DRIP ZONE ASSEMBLY - P52-075

Everything you need to start a drip system in one package. This kit consists of a 3/4" electric valve, 155 mesh screen filter, preset 25 PSI pressure regulator and a 3/4" swivel adapter. Completely assembled, the P52-075 electric valve assembly is ready to install with your drip irrigation system. It can be connected to a DIG 8006, 8004 or any other 24-volt AC controller via 16 to 18 gauge electric wire. P52-075 can be installed below grade in a 12" irrigation box or above grade. The recommended flow rate is 8 to 9 GPM or 480 to 540 GPH..

• Heavy duty glass reinforced nylon valve
• Slow closin
• Easy in-line maintenance
• Large capacity filter
• Completely assembled
• Valve designed for compact enclosures
• Single piece diaphragm
• Valve with flow control and manual bleed

• Flow Rates: 1-12 GPH
• Operating Pressure: 10-125 PSI
• Temperature Range: up to 130 degrees
• Filtration Area: 11 square inches
• Weight: 1.5lbs
• Dimensions: 11.25"L x 9"H