Home > Wire & Electrical > Waterproof Wire Connectors >

Blazing Products LV9000 Snap-Locking Waterproof Wire Connectors

Our Price: $0.68

: in stock
Product Code: LV9000

Qty:

Description

Extended Information

ORDERING INSTRUCTIONS: The Blazing LV9000 Wire Connector is sold individually. However, to order bag quantities, please order in multiples of 24.

Snap-Locking Waterproof Connectors with Pre-Filled Silicone

LV 9000

Perfect for bundling your commons.
Best low-voltage connections for landscape lighting, irrigation & more...
100% Waterproof
Quick, compact and easy!

Blazing Wire Connectors LV 9000 are the low-voltage wire connectors designed for the professional irrigation and landscape lighting contractor. Unlike twist-on connectors, you never have to doubt the connection.

Superior Performance When it Counts

Lawn Irrigation Systems
Low-Voltage Landscape Lighting
Security Systems
Telephone Wire Splices
Boats, Recreational Vehicles
Heavy Construction Equipment

Snap-Locking connectors eliminate common install problems:

Locking	- Never loosens or dangles off wires
Foolproof	- Never fails to grab the wires
Easy	- Compact 5-second installation
No Mess	- Silicone encapsulates connection and will not melt out
No Tunneling Effect	- No channel for moisture to follow into the connection
Vibration Proof	- Connection stays secure

Locks Tight with Double O-Ring Seals

Just squeeze and lock to hydraulically pump and pack waterproofing silicone. Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires. Blazing Wire Connectors™ are vibration-proof and never dangle off the wires.

Say Goodbye to Traditional Connector Problems

Are you familiar with the traditional problems of "waterproof" low-voltage wiring?

When you go back to a valve box, do you find connectors dangling off the ends of the wires?
When installing, do you twist and twist and the twist-on connectors still don't grab the wires?
Do you regularly have to pull out the wires, removing the silicone with them?
Do you overtwist and the wires break off inside?
Do you have to turn your connector upside down so it doesn't collect water?
Is it too messy if you ever have to get back into the connection?

Blazing Wire Connectors™ solve all of these problems with their patented design.

"A poor wire connection will always lead to an expensive and time-consuming call back. A call back takes time and money out of the contractor's pocket... Unlike ordinary twist-on wire connectors that traditionally cause gaps into which moisture can enter and accumulate, Snaploc wire connectors are 100-percent water resistant."
--Tech Times, Official quarterly of Irrigator Technical Training School, CA ("Snaploc...Innovation at Its Best!", Fall 2001)

Blazing Wire Connectors™ Installation Instructions

(Formerly known as SNAPLOC™ Low-Voltage Wire Connectors.)

Additional Tools Required: None.

INSTRUCTIONS FOR LV 9000:

Strip wires 3/4" and group bare wire ends together. No pre-twisting necessary with solid wire. Pre-twist stranded wire. If using both wire types, wrap stranded wire around solid wires (see illustration 1A).
Insert wires through flexible sealing fingers and bend wires into either "V-Channel".
Push inner sleeve into pre-filled outer sleeve until double-locked. Pre-filled silicone fully waterproofs the connection. Do not reuse connector.

INSTRUCTIONS FOR LV 9500:

Strip wires 1" and group bare wire ends together. No pre-twisting necessary with solid wire. Pre-twist stranded wire. If using both wire types, wrap stranded wire around solid wires (see 1A).
Insert wires through flexible sealing fingers and bend wires into one "V-Channel". For large wires or large combinations, use the "V-Channel" with round hole at bottom; pull wires into hole below "V". To bend heavy solid wires, use bending sleeve / depth gauge on outer sleeve of connector.
Push inner sleeve into pre-filled outer sleeve until double-locked. Pre-filled silicone fully waterproofs the connection. Do not reuse.

Blazing Wire Connectors™ Product Specifications

(Formerly known as SNAPLOC™ Low-Voltage Wire Connectors.)

The LV 9000 and LV 9500 wire connectors can be used with both solid and stranded wires.

Blazing Wire Connectors™ applications include:

Lawn Irrigation Systems
Low-Voltage Landscape Lighting
Security Systems
Telephone Wire Splices
Boats, Recreational Vehicles
Heavy Construction Equipment

LV 9000 / (small)

WIRE SIZES: Minimum 2 #24 gauge wires; Maximum 5 #18
APPLICATION: Maximum 30 Volts / 10 Amps. Copper and/or aluminum wire, solid or stranded
SEALANT TEMPERATURE: -40°F to 400°F
WARNING! Not for high-voltage connections.

LV 9500 / (large)

Designed specifically for landscape lighting, golf courses, and larger irrigation wiring.

WIRE SIZES: Minimum 2 #18 gauge wires; Maximum 3 #10 & 1 #18
APPLICATION: Maximum 30 Volts Copper and/or aluminum wire, solid or stranded
SEALANT TEMPERATURE: -40°F to 400°F
WARNING! Not for high-voltage connections.

Not to be sold without installation instructions. Use only in accordance with local and national codes. Contact factory for warranty information. U.S. Patent #6,051,791. All other trademarks, U.S. & Foreign Patents apply.