Rotor Height: 4"
Overall Body Height: 7 3/8"
Bottom: ¾" (15/21) NPT female threaded inlet
Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

The 5000 Plus Series mid-range rotor compliments Rain Bird’s already strong Top Adjust Rotor Family, by offering greater durability, enhanced Rain Curtain™ Nozzles and the superiority of Stream Control™ Technology. This innovative new rotor has been designed with the needs of the customer in mind, while still conforming to Rain Bird’s high quality standards.

Whether used in a residential, commercial, or athletic field applications, the 5000 Plus Series promises to deliver "The Next Evolution in Rotor Performance".

Features and Benefits:

• The 5000 Plus Series Rotor is available in 4", 6", 12", Shrub, and Stainless Steel models.
• Standard Green Rubber Cover for extra protection and easy identification
• Heavy-duty cover assembly for extra durability in residential or commercial applications
• Stream Control™ Technology (SCT) with Flow Shut-off capabilities
  • Flow Shut-Off device (cone valve™) integrated into the flow path of the rotor assures maximum stream efficiency
  • Flow Path to Nozzle Bore transition radius minimizes pressure loss and assures peak nozzle performance
  • Smoothed Flow Path entrance of the rotor, increases the maximum flow capabilities
• Enhanced Rain Curtain™ Nozzles
  • Increased radius range with less flow per nozzle
  • New Micro-Ramps™ for Superior Close-in Watering
  • Nozzle Extraction Feature for easy rotor maintenance
• Debris Sentry™ integrated into the turret of the rotor, protects the internals from debris
• Heavier-duty retract spring assures positive pop-down
• Tree of nozzles including low angle (Angle of Trajectory 10º) and standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25º) provides 25 to 50 (7,6 to 15,2M) distance of throw
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
• The same water-lubricated gear-drive mechanism as the 5000 Series Rotor.
• 40- 360° Arc Rotation and reversing full circle rotation in one. (A non-reversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4" (10 cm) pop-up (measured from the case cover to the nozzle.)
• Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional o-rings and seals for extra protection in "gritty" water
• Optional stainless steel riser helps deter vandalism on public turf areas
• Optional pre-installed Rain Curtain™ nozzle
• Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable cover for easy identification of reclaimed water

Models:

Part Circle units (PC) are adjustable from 40 – 360 degrees. Full Circle units (FC) are 360 degrees only.

Operating Range:

• Precipitation rate: .20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Optimal nozzle performance at 45 psi
• Flow Rate: .73 to 9.63 gpm (0.17 to 2,19 m³/h)

Specifications:

• 3/4" (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°

Dimensions:

• Pop-up height: Shrub: 4” (10 cm); 4" (10 cm); 6" (15 cm); 12" (30 cm);
• Overall body height: Shrub: 7 3/4” (19,7cm) 4": 7 3/8" (18, 5 cm); 6": 9 5/8" (24,5 cm); 12": 16 7/8" (42,9 cm)
• Exposed surface diameter: 1 5/8" (4,1 cm)
  Note: Pop-up height measured from cover to the nozzle. Overall body height is measured popped down.

How To Specify:

5000 Plus Series Rotor Technical Specification
5000 Plus Series Full and Reversing Full/Part Circle Sprinkler

The full and/or part circle sprinkler shall be a single-stream, water-lubricated, gear-drive type capable of covering a ___ foot (xx meter) at ___ pounds per square inch (psi) or (bar) with a discharge rate of ___gallons per minute (___ gpm) (___ m³/h). The sprinkler shall have a flow shut-off device that is integrated into the flow path of the rotor as well as an adjustable arc coverage of 40 to 360 degrees. Arc adjustment can be performed with or without the sprinkler in operation and shall require only a flat-blade screwdriver.

The Sprinkler shall have a smoothed flow path entrance to enhance the flow characteristics of the rotor. In addition, the sprinkler shall feature a flow path to nozzle bore transition radius to minimize pressure loss and assure peak nozzle radius is achieved.

The sprinkler shall have a pressure activated, multi-function wiper seal that positively seals against the pop-up stem to keep debris out of the rotor and to clean debris from the pop-up stem as it retracts.

This wiper seal shall prevent sprinkler from sticking up, and be capable of sealing the sprinkler cap to sprinkler body under normal operating pressures.

The sprinkler shall have a screen installed in the pop-up stem to filter inlet water, protect the drive from clogging and simplify its removal for cleaning and flushing of the system. It shall have a 3.4" (FNPT) bottom inlet.

The sprinkler shall have a standard green rubber cover and a strong stainless steel retract spring for positive pop down. Pop-up height as measured from the top of the cap, at normal installation, to the middle of the nozzle orifice shall be __ inches or __ cm.

The rotor’s overall height shall be ___ inches (_____cm), with an exposed surface diameter of 11/2 “ (3,8 cm). The sprinkler shall have 12 interchangeable nozzles: 8 Rain Curtain nozzles for superior coverage and, 4 Low Angle nozzles for reduced radius of throw and superior wind resistance with all nozzles containing Micro-Ramp™ for superior close-in watering. The angle of trajectory shall be 25 degrees for the Rain Curtain nozzles and 10 degrees for the low angle nozzles.

The sprinkler shall come with a stainless steel adjusting screw capable of reducing the radius up to 25%. The sprinkler shall be as manufactured by Rain Bird Corporation, Glendora, California.

Optional Feature Specification
5000 Plus Series SAM, Full and Reversing Full/Part Circle Sprinkler SAM unit

When so indicated on the design, the sprinkler shall have a spring-loaded Seal-A-Matic™ (SAM) device in the base of the case. The device shall hold back at least 7' (2, 13m) of elevation change to prevent puddling, run-off and erosion caused by low-head drainage.

5000 Plus Series Full and Reversing Full/Part Circle Non-Potable

When so indicated on the design, the sprinkler shall have a purple rubber cover to indicate to the user that non-potable water is being used. There shall be no difference between the black and the purple covers, except for the color. The sprinkler shall be as manufactured by Rain Bird Corporation, Glendora, California.

5000 Plus Series Shrub Model Full and Reversing Full/Part Circle Sprinkler (SAM)

When so indicated on the design, the shrub model shall contain all of the specifications of the standard 5000 Plus series rotor plus a locking screw to fasten the shrub unit to the riser. Additionally, the shrub base unit will feature Secure Ribs™ that are designed to assist in the staking of the shrub model if so specified on the design. When the Seal-A-Matic ™ (SAM) model is indicated on the design, the device shall hold back at least 7' (2,13m) of elevation change to prevent puddling, run-off and erosion caused by low head drainage. As well the SAM unit shall experience no pressure loss during normal operation.

5000 Plus Series Stainless Steel

When so indicated on the design, the rotor shall have a stainless steel covered nozzle turret and riser stem. This riser stem shall be tapered and conform to the standard plastic riser in all other ways.

5004 Rotor designed to be one of the best!


click for details

click to enlarge

click to enlarge

click to enlarge