Pop-Up Height: 6"
Overall Body Height: 9 5/8"
Exposed surface diameter: 1 5/8"
Non-Adjustable 360° ONLY (Full Circle Pattern Only)
Bottom: ¾" (15/21) NPT female threaded inlet
Note: If the overall height of spray head is too tall for your application, you can use a Hunter Pre-Made Swing Joint to move the head off the pipe and allow you to bury it deeper.
 

Primary Applications:

The 5000 Series Rotor is a rugged mid-range gear-drive rotary sprinkler, offering durability, performance, and the convenience of arc adjustment from the top, for residential and light commercial applications. This versatile rotor offers a standard rubber cover and the convenience of non-reversing full circle operation (360 degrees). And, with a tree of Rain Curtain™ nozzles, the 5000 Series Rotor offers excellent distribution for top-notch efficiency. All of this, a proven gear-driven design, and a five-year trade warranty, makes the 5000 Series Rotor one head that will "Take Performance to the Top."

Features and Benefits:

• The 5000 Series Rotor Sprinkler is available in 4", 6", 12" and Shrub models.
• Standard Rubber Cover for extra protection and easy identification.
• Heavy-duty cover assembly for extra durability in residential and commercial applications.
• Enhanced Rain Curtain™ Nozzles
  - Increased radius range with less flow per nozzle
  - New Micro-Ramps™ for superior close-in watering
  - Nozzle Extraction Feature for easy rotor maintenance
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including low angle (Angle of trajectory 10°) and standard angle Rain Curtain™ nozzles (Angle of trajectory 25°) provides 25 to 50 ft (7 to 15,2 M) distance of throw.
• Top-adjust arc adjustment requiring only a flat-bladed screwdriver
• Five-year trade warranty.
• Water-lubricated gear-drive design for durable, reliable operation
• 360° Arc Rotation for non-reversing Full-Circle rotation. (This is the non-reversing full circle only unit).
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4" (10 cm) pop-up (measured from the case cover to the nozzle)
• Pressure activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional o-rings and seals for extra protection in "gritty" water

Models:

Full Circle units (FC) are 360 degrees only.
Part Circle units (PC) are available and are adjustable from 40 – 360 degrees.

Specifications:

• Precipitation rate: .20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: .73 to 9.63 gpm (0,17 to 2,19 m³/h)
• 3/4" (20/27) NPT female bottom threaded inlet
• Full circle only adjustment 360°

Options

• Optional Pre-installed Rain Curtain™ nozzles
• Optional Seal-A-Matic (SAM) check valve holds back up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable cover for easy identificaion of reclaimed water

Dimensions:

• Pop-up height: Shrub: 4" (10 cm); 6" (15 cm); 12" (30 cm)
• Overall body height: Shrub: 7 3/4" (19,7 cm), 4": 7 3/8" (18, 5 cm); 6": 9 5/8" (24,5 cm); 12": 16 7/8" (42,9 cm)
• Exposed surface diameter: 1 5/8" (4,1 cm)
  *Note: Pop-up height measured from cover to the nozzle. Overall body height is measured popped down.

5004 Rotor designed to easily upgrade Hunter PGP® rotors to 5000 Series Performance.

click for details

click to enlarge

click to enlarge

click to enlarge