RAIN BIRD ESP-TM SERIES CONTROLLERS / TIMERS:

The Rain Bird ESP-TM controller / timer is a dual program hybrid irrigation controller with a ton of water-saving features.

Rain Bird ESP-TM controllers incorporate all of the features of the ESP Series, therefore making a good thing even better. The Rain Bird ESP-TM irrigation timer sports a thin cabinet that is attractive to look at while being easy to use at the same time.

When Rain Bird was developing this irrigation controller, they had water-conservation in mind. The Rain Bird ESP-TM Controller exhibits dual programming which eliminates accidental over watering in one area in order to maintain another. It features two-, three- and five-day fixed watering cycles or a seven-day variable cycle. The Rain Bird ESP-TM Controller / Timer is simplicity at it's finest!

• ESP: Extra-Simple Programming
• Two independent programs (A and B)
• "Flip Strip" terminal strips permits valve wire hookup without screws.
• Wiring skirt for clean looking; professional installation.
• System water budgeting makes seasonal adjustments quick and easy.
• Precise station timing in 1-minute increments.
• Programmable day-of-week watering schedule.
• Independent dual programming.
• Easy-to-understand AM/PM clock.
• Self-prompting alphanumeric liquid crystal display (LCD)
• External plug-in style transformer
• Slim; indoor cabinet.
• Manual start/advance capability for semi-automatic operation and system testing.
• Mounting screws provided for convenient installation
• Large; high contrast LCD

• Width: 7" (17;8 cm)
• Height: 8 1/4" (21;0 cm)
• Depth: 2 1/4" (5;7 cm)

• Station timing: 0-99 minutes (in 1-minute increments);
  0-198 minutes with water budgeting
• Automatic starts: 3 per day for each program (6 per day when using dual program capability)
• Programming schedule: 2-; 3-; or 5-day fixed cycle or 7-day variable cycle
• Water budgeting: 10-200% in 10% increments

• Input required: 117VAC; 60Hz
• Output: 24VAC; 0.65A
• Overload fuse: (spare fuse provided in access cover)
  ESP-TM: 0.5A
• Surge protection: Primary input side has built-in MOV (metal oxide varistor) to protect microcircuitry; output side has one built-in MOV for each valve station
• Battery backup: A 3V lithium coin cell battery maintains program memory up to several months and keeps timing accuracy during a power outage (battery included with controller)
• Default program: After prolonged power interruption; each station waters 10 minutes per cycle beginning 8 hours after power resumes - once per day for the 7-day custom cycle or on the first day of the 2-; 3- or 5-day fixed cycle
• Multi-valve station capacity:
  One 24VAC; 7VA solenoid valve per station; plus a master valve